Manual Subaru FORESTER 2010 (page 221 of 404) (English)

624205

221

Zoom out

Zoom in

1/404

If the engine do es not start, try the

following.

(1) Turn the ignition switch to the

“OFF” position and wait for at least

10 seconds. After checking that the

parking brake is firmly set, turn the

ignition switch to the “START” position

while depressing the accelerator pedal

slightly (approximately a quarter of the

full stroke). Release the accelerator

pedal as soon as the engine starts.

(2) If this fails to start the engine, turn

the ignition switch back to the “OFF”

position and wait for at least 10

seconds. Then fully depress the accel-

erator peda l and tu rn the i gnition

switch to the “START” position. If the

engine s tarts, qui ckly rel ease the

accelerator pedal.

(3) If this fails to start the engine, turn

the ignition switch again to the “OFF”

position. After waiting for 10 seconds

or longer, turn the ignition switch to the

“START” position without depressing

the accelerator pedal.

(4) If the engine still refuses to start,

contact your nearest SUBARU dealer

for assistance.

6. Confirm that all warning and indicator

lights have gone off after the engine has

started. The fuel injection system auto-

matically lowers the idle speed as the

engine warms up.

NOTE

. The engine may be difficult to start

when the battery has been discon-

nected and reconnected (for mainte-

nance or other purposes). This diffi-

culty is caused by the electronically

controlled throttle’s s elf-diagnosis

function. To overcome it, keep the

ignition switch in the “ON” position

for approximately 10 seconds before

starting the engine.

. For non-turbo models, to protect the

engine while the shift lever is in the

neutral pos ition, the engine is con-

trolled so that the engine speed may

not become too high even if the accel-

erator pedal is depressed hard.

& Automatic transmission

model

1. Apply the parking brake.

2. Turn off unnecessary lights and ac-

cessories.

3. Shift the selector lever to the “P” or “N”

position (preferably “P” position).

The starter motor will only operate when

the selector lever is at the “P” or “N”

position.

4. Turn the ignition switch to the “ON”

position and check the operation of the

warning and i ndicator lights. Refer to

“Warning and indicator lights” F3-9.

5. Turn the ignition switch to the “START”

position without depressing the accelera-

tor pedal. Release the key immediately

after the engine has started.

If the eng ine doe s not star t, try th e

following.

(1) Turn the ignition switch to the

“OFF” position and wait for at least

10 seconds. After checking that the

parking brake is firmly set, turn the

ignition switch to the “START” position

while depressing the accelerator pedal

slightly (approximately a quarter of the

full stroke). Release the accelerator

pedal as soon as the engine starts.

(2) If this fails to start the engine, turn

the ignition switch back to the “OFF”

position and wait for at least 10

seconds. Then fully depress the accel-

erator peda l and turn the ignitio n

switch to the “START” position. If the

engine starts, quickly release the

accelerator pedal.

(3) If this fails to start the engine, turn

the ignition switch again to the “OFF”

position. After waiting for 10 seconds

or longer, turn the ignition switch to the

“START” position without depressing

the accelerator pedal.

Starting and operating 7-9

– CONTINUED –

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Subaru FORESTER 2010 in the language / languages: English as an attachment in your email.

The manual is 7,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Subaru FORESTER 2010 Manual

Product: