785936
7
Zoom out
Zoom in
Previous page
1/41
Next page
1.
2.
2.
1.
ON/OFF
OUTPUT
HUMIDITY
Speed Humidity Timer
No WaterNight
TIMER
NIGHT MODE
12 13
5.
DESCRIPTION OF THE DEVICE
The device consists of the following main components (please see inside cover):
STARTING UP / QUICK GUIDE
This quick guide helps practised users to start the device in a few steps. For detailed start-up
instructions, please consult the next chapter.
5. Screw the tank lid (15) firmly onto the tank.
6. Turn the tank upside down and check for water leakage.
7. Install the tank, and you should hear a bubbling sound (water
collector filling).
8. Replace the water tank lid (4): first attach to the underside and
then swivel until the magnetic catch (12) holds in place.
9. Insert the power plug («ON/OFF» is displayed).
10. As soon as the water collector is completely full, the red display
«No Water» goes out. The humidifier is now ready to use.
11. Switch on the device: by touching the «ON/OFF» key. The display
will show «ON» briefly followed by the current humidity, e.g. «41».
Shortly after this, the sound of the water boiling can be heard
and hot steam will be emitted. Do not touch. Danger of scalding!
12. To set the humidity: set the desired humidity by repeatedly
touching the «HUMIDITY» key, (35–75 % rel.). We recommend
40- 60 %. As soon as the display shows the current relative air
humidity, the humidity setting is saved and automatically moni-
tored. Set «CO» for continuous operation without humidity moni-
toring, but this may cause excess humidity if used too often.
13. Set the desired humidifying capacity: by repeatedly touching
the «OUTPUT» key (1= low, 3 = high).
14. Activate the automatic shutdown: by repeatedly touching the
«TIMER» key. Adjust the shutdown time in hours (01-12 hours,
or «00» for no timer).
15. Night mode: touch the «NIGHT MODE» key to dim the light.
Switch off function by touching any function key.
1. Place the humidifier on a stable and watertight surface, never
on a carpet or parquet floor.
2. Take off the cover (4) at the rear side (magnetic catch). Re-
move the water tank (13). Hold the water tank firmly by the
handle, swivel outwards and pull it upward.
3. Turn the tank upside down. Unscrew and remove the tank lid
(15) .
4. Fill the tank with no more than 3.5 litres (0.92 US gallons) of
cold fresh water.
1. Display with touch-sensitive control panels
2. Steam outlet (hot!)
3. Water level window
4. Cover (rear side)
5. Housing
6. Operating mode display
No Water: «low water»
12. Magnetic catch
13. Water tank
14. Power cable with Hygrostat sensor (do
not cover)
15. Tank lid
16. Upper steam pipe
7. ON/OFF power key
8. OUPUT: Steam output
9. HUMIDITY: Air humidity
10. TIMER: Timer mode
11. NIGHT MODE: Night mode
17. Lower steam pipe
18. LED display
19. Water level sensor
20. Water collector
21. Vaporizing plate
1./2.
3.
11.–15.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stylies Sirius at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stylies Sirius in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info