554098
78
Zoom out
Zoom in
Previous page
1/94
Next page
S21-IME-6L
12-10
78
Vérification de l'état des joints
Attendre le refroidissement complet du
foyer.
Basculer la porte.
Vérifier l'état du joint tissé situé sur le
pourtour de la porte (photo 27).
Vérifier l'état du joint inférieur en silicone
(photo 28).
Contacter votre revendeur en cas de
détérioration.
Fermer la porte.
Lubrification des glissières
Attendre le refroidissement complet du
foyer.
Placer un support et une loque pour
déposer la porte.
Basculer la porte (photo 29).
Décrocher les câbles de la porte. Les
attacher en mode veille (photos 30, 31 &
31').
Déposer la porte sur la loque.
Coulisser la vitre au maximum, pour
accéder aux glissières.
Attention au porte-à-faux pour les 21/45,
21/65H et 21/95, utiliser 2 supports.
Lubrifier les 2 côtés des 2 chariots
(photos 32 & 33).
Recoulisser la vitre vers le foyer, replacer
les 2 câbles de contrepoids sur les parties
coulissantes.
Refermer la porte en appuyant le bouton
de préhension vers le bas (photo 34).
Nettoyage des aimants de fermeture
de vitre
Basculer la porte.
Coulisser la vitre de ± 4cm.
30
29
27
28
Verifica dello stato delle guarnizioni
Attenzione : attendere che il fuoco sia
completamente spento !
Aprire completamente la porta.
Verificare lo stato della guarnizione in
tessuto situata sul profilo della porta
(foto 27).
Verificare lo stato della guarnizione
inferiore in silicone (foto 28).
Contattare il rivenditore in caso di
deterioramento.
Richiudere la porta.
Lubrificazione delle guide
Attenzione : attendere che il fuoco sia
completamente spento!
Sostenere la porta con un supporto.
Aprire completamente la porta (foto 29).
Staccare i cavi della porta. Fissarli in
modalità “attesa” (foto 30, 31 e 31’).
Sistemare la porta sul supporto.
Far scorrere il vetro fino in fondo per
accedere alle guide.
Con i modelli 21/45, 21/65H
e 21/95, utilizzare 2 supporti.
Lubrificare i 2 lati dei 2 carrelli (foto 32
e 33).
Far scorrere il vetro verso il monoblocco
e ricollocare i 2 cavi di contrappeso sulle
parti scorrevoli.
Richiudere la porta premendo il gancio di
chiusura verso il basso (foto 34).
Pulizia degli elementi magnetici di
chiusura del vetro
Aprire completamente la porta.
Far scorrere il vetro di ± 4cm.
Controle van de staat van de
dichtingen
Wacht totdat de haard volledig is
afgekoeld.
Kantel de deur.
Controleer de staat van de stoffen
dichting over de omtrek van de deur
(foto 27).
Controleer de staat van de dichting van
silicone aan de binnenkant van de deur
(foto 28).
Neem contact op met uw verdeler bij
beschadiging.
Sluit de deur.
Smering van de gleuven
Wacht totdat de haard volledig is
afgekoeld.
Plaats een steun en een doek om de deur
op te zetten.
Kantel de deur (foto 29).
Haak de kabels van de deur los. Bevestig
ze in "standby"-stand (foto’s 30, 31 &
31’).
Zet de deur op de doek.
Schuif de ruit zoveel mogelijk opzij om bij
de gleuven te kunnen.
Let op de overstekende delen voor de
21/45, 21/65H en 21/95, gebruik 2
steunen.
Smeer de 2 zijden van de sleden (foto’s
32 & 33).
Schuif de ruit weer naar de haard, plaats
de 2 tegengewichtkabels weer op de
schuivende delen.
Sluit de deur en druk daarbij de
vastklikknop naar beneden (foto 34).
Schoonmaken van de sluitmagneten
van de ruit
Kantel de poort.
Verschuif de ruit ± 4cm.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stuv 21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stuv 21 in the language / languages: English, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stuv 21

Stuv 21 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info