750860
22
Zoom out
Zoom in
Previous page
1/25
Next page
Problem Possible cause What to do
The LED/standby
indicator and LED
display (if available on
your receiver) are not
switching on.
The power cable or power
adapter is unplugged.
Check that the power cable or
power adapter is plugged to the
wall outlet.
If your receiver has a main power
switch: The main power switch on
the rear panel is set to OFF.
Switch the main power on.
The electrical outlet may be
damaged.
Check with another device if the
electrical outlet is supplied.
No signal.
The receiver is not connected to
the signal source (DVB-C) or to
the antenna (terrestrial or satellite
antenna).
Check the lead of the antenna
or cable.
Check that the coaxial cable is
correctly fitted to the antenna
input on the receiver.
Damaged or defective connectors
(IEC-connectors (DVB-T2).
Check connectors for visible
damage.
The antenna (terrestrial or
satellite) is damaged.
Check the antenna for visible
damage.
Out of digital signal area. Check with your dealer or contact
your local Service.
An active antenna requires that
the antenna power/external
power is switched ON.
Switch the antenna power of the
receiver ON/connect an external
power source.
Wrong direction of the antenna.
Check the signal strength and
quality and adjust your antenna
correctly, or contact your local
Service.
Multiswitch is defective or
power cable or power adapter of
Multiswitch is unplugged.
Check that the power cable or
power adapter of Multiswitch
is plugged to the wall outlet.
Contact your local Service.
The picture and sound
remain frozen, or
macro blocks or similar
distortion are visible on
the screen.
The transmission signals are
too weak or have reflections/
interference.
The antenna is not properly
adjusted.
Press the INFO key on the remote
control 3x to call up signal bars to
visually assess signal strength and
signal quality (both parameters
should be visible in the last third
of the infobars). Contact your local
Service.
18
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT8209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT8209 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT8209

Strong SRT8209 User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info