750860

Strong SRT8209 Manual

18
Zoom out
Zoom in
Previous page
1/25
Next page
16:9 Pillarbox A 4:3 programme will be shown normally, but with black bars to the left and
right.
16:9 Pan&Scan A 4:3 programme will be shown as a centre blow up to fill the whole screen,
missing content to the left, right, top and bottom of the programme.
16:9 Pillarbox 16:9 Pan&Scan
broadcasts in full screen on a 4:3 TV. Letterbox: black bars on top and bottom
of the picture on a 4:3 TV. Combined: shows a mix in-between. Ignore: shows
as it is.
Resolution If the video quality does not appear correctly, change the setting. These
settings match the most common settings for HDMI.
576i: For analogue TVs (on Scart connection).
576p: For digital SD TVs (some digital TVs do not support this mode).
720p: For digital HD TVs (on HDMI connection).
1080i: For digital HD TVs (on HDMI connection).
1080p(50Hz): For digital HD TVs (on HDMI connection).
Auto: The best possible resolution available will be auto negotiated by between
TV and receiver (‘handshake') when using a modern digital HD TV when
connected with an HDMI cable.
TV Format Options are PAL and NTSC. For European broadcasts, the TV format is PAL
(Default). The setting is most important for TVs connected via Scart cable.
Using NTSC might deliver black& white pictures.
7.5 Channel Search
Auto Search This menu allows you to search for channels from all available frequencies
for your selected region automatically. Be aware that all previous installed
channels and favourite list(s) will be deleted. The new-found channels will be
installed in the channel list and afterwards you can create a new favourite list
if you like. Press OK to start the scan.
Manual Search Select a particular channel to do a search on just one (known) frequency.
Press OK to start the scan. The signal quality bar might be useful to
check if the frequency is indeed in use.
Country Select the correct country where this receiver is used. If failing to do so, may
result in that channels appear randomly in the channel list, instead of a more
logical order.
Antenna Power Set to On if you use an active antenna. When set to On, 5 V will be present at
the RF in connector of the receiver. Select Off for passive antennas.
Scan Mode Select between FTA (Free-To-Air), which will only install Free-to-Air channels
or All, which will install all found channels, even if they are scrambled. Then
select Auto Search or Manual Search and press OK to start scanning.
7.6 Time
Set up your time zone for clock/time in your menu and system.
Time Offset The GMT time can automatically be determined from the incoming TV
broadcast if set to Auto. The time zone is determined from the Country
setting in the Channel Search menu. If set to Manual, you can change the
Time zone yourself in the Time Zone option. Default is Auto.
14
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT8209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT8209 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT8209

Strong SRT8209 User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info