PART 1 • English
8
3.2 Connecting to a satellite dish
3.2.1 Connecting a fixed satellite dish to your receiver
(Please see inside cover Figure 11)
n Select the satellite from which you want to receive your TV/Radio channels.
n Align your dish at the requested satellite.
n Connect a coaxial cable to your LNB.
n Connect the other end directly to the SAT IN connector of your receiver.
3.2.2 Connecting multiple fixed dishes to your receiver using a DiSEqC1.0 switch
(Please see inside cover Figure 12)
If you want to watch programs from more than one satellite (For instance from Astra and from Hot Bird)
it is advisable to use fixed dishes and a DiSEqC 1.0 switch.
n Have your Strong Dealer aim the dishes at the requested satellites.
n Connect the LNB’s with coaxial cables to the IN connectors of the DiSEqC 1.0 switch.
n Connect the OUT connector of the DiSEqc 1.0 switch to the SAT IN connector at the BACK of your receiver.
3.2.3 Connecting a dish on a motorized positioner to your receiver
(Please see inside cover Figure 13)
Another possibility of watching programs from multiple satellites is by mounting a dish to a motorized
DiSEqc 1.2 positioner.
n Have your Strong dealer mount the dish to the positioner with the correct azimuth angle of
elevation and let him set the centre point for your positioner.
n Connect the LNB with a coaxial cable to the LNB IN connector of the positioner.
n Connect the OUT connector of the positioner to the SAT IN connector at the BACK of your receiver.
