PART 1 • English
5
English
2.0 YOUR RECEIVER
2.1 Front Panel
(Please see inside cover Figure 1)
1. Power Button
Turns the receiver ON/Stand-by.
2. Signal LED
The RED LED is the “stand-by” indicator. The GREEN LED is the “Power On” indicator. The
amber LED lights up once the receiver correctly receives the satellite signals.
3. Channel UP/DOWN Buttons
Move the channels UP/DOWN or Move the cursor UP/DOWN in Menu state.
4. Display
This 4-digit LED panel indicates the time or program number.
5. Smart Card reader
The smartcard reader is designed for Smartcards used to descramble Pay-TV services broadcasted in
Mediaguard encryption.
2.2 Rear Panel
(Please see inside cover Figure 2)
1. SAT OUT
Gives you the possibility to connect an extra receiver (analogue or digital).
2. SAT IN
Connect the cable from your LNB in your satellite dish to this connector.
3. AUDIO Right OUT (RED RCA) and Left OUT (White RCA)
These connectors give you the possibility to connect the audio signal to an external amplifier
or to the audio input of your TV.
4. VIDEO OUT (YELLOW RCA)
This connector has a constant video signal for additional Video connections like Wireless
video sender.
5. TV Scart Connector
Use this connector to connect your receiver to your TV using a scart cable.
6. VIDEO Scart Connector
Use this connector to connect your receiver to your video recorder using a scart cable. Your video
recorder signal will now be looped through to your TV.
7. IR SENSOR
Use this connector to connect your remote eye (optional accessory) to control your receiver,
for example once your receiver is hidden in a well ventilated cabinet
8. RS-232 Serial Port
This serial port is for service purpose only.
9. Input Antenna
RF Modulator (female part). If you have cable TV or if you have an outdoor antenna, then you