4.0 Quick start
Check if all connections between Satellite receiver, Dish, TV and VCR are correct.
Connect the receiver to the mainpower and switch the unit ON with the Power
ON / Standby-button on the frontpanel or on the Remote control.
Switch ON your TV set. Your TV will automatically switch to the signals coming
from your satellite receiver. If you don't see the picture from the satellite receiver
now, please switch your TV manually to the External video source, you can do
this by pressing the AV or EXT button on the Remote control of your TV.
Note:
Refer to your TV manual to find out how your TV switches to the External video
Source.
You are now ready to Set Up your receiver:
1. The cursor of the menu highlights the “Language Settings”.
2. Use the UP/DOWN keys on your Remote control, select the language in which
you want your menu to be displayed and press OK. The screen of the menu will
now change to the language of your choice, and the menu option “Channel
Set-Up” will appear on your screen.
3. You will see the “Channel Set-Up” screen with different parameters. The pre-set
values are correct for the ASTRA satellite. We strongly advise you to NOT
change any of the settings before you are sure that your dish is aligned correctly.
4. You will see two signal bar fields at the right lower part of your screen, showing
Signal strength and signal quality.
5. Leave the satellite receiver in this menu and start with the alignment of your
dish. The ASTRA satellite is located at 19.2° East. Find with a compass what is
North and South, keep the Compass in your hand and turn your position until
South is in front of your face. Now turn 19 Degrees to he left, this is roughly the
position where the Astra satellite must be found.
PART 1
•
English
12
