PART 1
•
English
9
5.VIDEO Scart Connector
Use this connector to connect your receiver to your video recorder using a scart
cable. Your video recorder signal will now be looped through to your TV.
6. RS 232 Serial Port
This serial port is for service purpose only.
7. Power Cord
Your receiver requires a mains voltage supply of 90~240V AC (Auto-selectable),
50~60Hz+/-5%. Make sure to check the power specification of the wall outlet
before connecting your receiver to the main power
3.0 Connections
3.1 Connecting to your TV & VCR
Warning:
If you are not sure how to connect your receiver, do not take the risk of doing it yourself.
Ask your Strong dealer to do it for you. They are specially trained by our technicians and
can get the best performance out of your receiver.
3.1.1 Basic connection with a Scart cable (Please see inside cover Figure 5)
Connect the satellite signal from the LNB to the SAT IN connector.
Connect the TV scart connector at the back of the receiver to the scart-in connector
on your TV set.