480577
25
Zoom out
Zoom in
Previous page
1/40
Next page
24 www.strongsat.com
Setup
When you use the Control Settings menu, you need to enter your PIN code.
Note
If you do not have a smart card inserted in your set-top box, you cannot use the Control
Settings menu.
About your PIN code
When you first use your set-top box, your PIN code is 0000.
In order to make your PIN code secret, you should change it to a secret number that
you find easy to remember (see below).
To display the Control Settings menu:
1. On the Setup menu, highlight Control Settings’, then press
OK.
You will see a message asking you to enter your PIN code.
2. Enter the correct PIN code then press
OK.
3. When you have finished using the Control Settings menu, press
back to
redisplay the Setup menu.
Changing your PIN code
You can change the PIN code to a secret number which you find easy to
remember. Please make sure you do not forget your PIN code.
To change the PIN code:
1. On the Control Settings menu, highlight ‘PIN code modification’ then press
OK.
‘New PIN code’ is highlighted.
2. Use the number buttons to enter a new 4-digit PIN code of your choice. If you
make a mistake, you can press L to delete a digit.
3. Press
D.
‘Repeat new PIN code’ is now highlighted.
4. Enter your new 4-digit PIN code again.
5. If you change your mind and do not wish to change the PIN code, press
back to
cancel your changes.
If you want to save the new PIN code, press OK.
Setting the age lock level
The age lock level lets you set an age limit, so that people who do not know the
PIN code (for example young children) cannot watch programmes that have an age
category rating that is older than the age lock level you have set.
For example, if you set this to ‘11+’, then programmes rated for viewers older than
11 will be locked, and you will need to enter your PIN code to watch them. Age lock
only works if the broadcaster provides rating category information.
If you do not want to set an age lock level, you can set this to ‘Off’.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6752 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info