65945
13
Zoom out
Zoom in
Previous page
1/26
Next page
PART 1 • English
9
English
n Move channel
Press the UP/DOWN keys to point the focus of the menu to the channel of your selection.
Press the LEFT/RIGHT keys to point the focus of the menu to the column “Move”. When
the focus is on column “Move”, press the OK button to confirm selection of the channel,
using the UP/DOWN buttons move the channel to its new location and press the OK
button to confirm the new location. Repeat this for every channel that you want to move.
n Delete channel
Press the UP/DOWN keys to point the focus of the menu to the channel of your selection.
Press the LEFT/RIGHT keys to point the focus of the menu to the column “Del”. When
the focus is on column “Del”, press the OK button to mark the channel as selected to be
deleted from the list. To apply the changes press the
EXIT button and confirm the channel’s
deletion.
n Delete all channels
To delete all channels from current satellite press
BLUE button (Dell All). You will be asked
to confirm operation.
5.1.2 Favorites Manager
Press the UP/DOWN keys to select the channel. Press the LEFT/RIGHT keys to point the focus
to the favorite group. Press the OK button to add the selected channel to the Favorite group. To
remove the channel from the favorite group, repeat same operation.
5.2 Installation
The installation menu contains three sub-menus; Antenna Installation”, Auto Scan” and Manual Scan”.
5.2.1 Antenna Installation
You can add a satellite, edit a satellite and delete a satellite in this menu.
n Add satellite
If you want to add a new satellite, press the
RED key in this menu, a satellite list will appear
on the screen. Press
LEFT/RIGHT to select the satellite. If the satellite does not exist in the
satellite list, please select “NEW SAT1”. After selection of a satellite from the satellite list,
the Configure Antenna menu will appear, please set the LNB Type, LNB Low Freq, LNB High
Freq, Band control, Polarisation control, DiSEqC Switch and Antenna mode. Future steps of
installation are described in 4.2.
n Edit satellite
If the parameters of the satellite were changed or the satellite is a new satellite, you must
set the parameters of the satellite, such as LNB type, LNB low Freq, LNB High Freq,
Transponder, LNB Power, 22k Tone, DiSEqC and Antenna Mode. Sequence of editing of
satellite parameters is same as sequence of Add satellite” and described in 4.2
n Delete satellite
If you want to delete a satellite, press the YELLOW key. Then a warning message will
appear. Select
OK and press the OK button to confirm.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6020 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT6020

Strong SRT6020 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info