68267
14
Zoom out
Zoom in
Previous page
1/23
Next page
PART 1 • English
11
English
Delete satellite
If you want to delete a satellite, press the YELLOW key. Then warning message will appear. Select
OK and press the OK key to confirm.
5.2.2 Auto Scan
Press the GREEN key to set the scan mode to Free or Free+Scrambled. If mode is Free then only “Free
to Air” channels will be added to the channel list. If mode is Free+Scrambled then all channels from
selected satellite will be added to the channel list.
Press the YELLOW Key to set the Blind Scan to ON or OFF. Blind scan function is useful to scan
new added satellite, but scan may take long time.
Press the BLUE Key to set the scan type to NIT OFF or NIT ON while Blind Scan is set to OFF and
to Quick Search or Detail Search while Blind Scan is set to ON.
When the set-up is completed, press the RED key to start the scan, shown as below.
5.2.3 Manual Scan
In this menu, you can scan single transponder, add a new transponder, edit the transponder or
delete the transponder.
You can switch between satellites with the
RED button,
Scan transponder:
Use UP/DOWN buttons to select the transponder. Press OK button to start scan.
Add Transponder:
In this menu, you can add a new transponder to the system. Press the GREEN button, the Add
Transponder sub-menu will appear.
Frequency: input the frequency of the new transponder.
Symbol Rate: input the symbol rate of the new transponder.
Polarity: Select the Polarity of the new transponder.
Edit Transponder
:
In this menu, you can edit a transponder in the system. Press the YELLOW button, the Edit
Transponder sub-menu will appear. This menu is similar to Add Transponder
menu.
Delete Transponder
Press the BLUE button to delete a transponder. You will need to confirm operation.
Press LEFT/RIGHT to select OK, press the OK button to confirm.
5.3 System setting
In this menu, you configure the system, such as Language Setting, OSD style, Parental Control, TV
Settings and Time Setting.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT6011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT6011 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT6011

Strong SRT6011 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info