751450
12
Zoom out
Zoom in
Previous page
1/23
Next page
Scan type Select which input source you want to use: DVB-S to receive satellite
broadcasts (and if you are equipped with a satellite dish), DVB-T to receive
terrestrial broadcasts or DVB-C to receive cable broadcasts.
3.1 DVB-S/S2 installation
Satellite Setting
First select th e region where you are using the TV. This important to set time zone correct. Use the
 and con rm with OK.
Press  to highlight the satellite your dish is aimed at. Con rm with OK to mark the satellite. Use
the  buttons to change settings for your satellite installation for each speci c satellite. The
signal quality bar on the bottom of the screen allows you to  ne tune the alignment of your antenna for
optimum reception. Adjust your antenna for maximum possible signal quality. When the signal cannot
be improved anymore,  x the dish on this position and press the BLUE Scan button to continue.
Channel Search
Press  to highlight the options of choice and press OK to start the channel search.
Scan Mode Choose between Default (recommended), Blind Scan, Network and Preset
Channel List.*
Crypted Select FTA Channels to search Free-To-Air channels only or All Channels to
search FTA and Encrypted channels
Service Type Select DTV to search DTV channels only, RADIO to search radio channels only
or All for a complete search.
It is recommended to use the default settings.
3.2 DVB-T/T2 in stallation
Terrestrial Setting
First select the Tune Type by pressing to select DTV, ATV or DTV+ATV (DTV to search digital
broadcasts and ATV to search analogue broadcasts). Press to continue. Press to select All
Channels or FTA Channels. Press  to highlight the country that you want to install, then press OK
to start searching.
3.3 DVB-C insta llation
Cable Setting
Press  to highlight your settings.
Scan type You can select Network Scan or Full. (Default Network Scan for quick search
advised)
NOTE: Full scan will have a duration of approximately 20 minutes, depending on
your cable network.
Frequency Please enter (with 0 ~ 9) the main frequency used by your provider in KHz.
Network ID Please enter (with 0 ~ 9) the used Network ID from your provider.
Symbol Please enter (with 0 ~ 9) the used Symbol from your provider. (Ks/s)
8
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT50UC4013 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT50UC4013 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT50UC4013

Strong SRT50UC4013 User Manual - German - 27 pages

Strong SRT50UC4013 User Manual - Dutch - 23 pages

Strong SRT50UC4013 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info