67507
17
Zoom out
Zoom in
Previous page
1/20
Next page
PART 1 • English
14
A.1 TROUBLESHOOTING
Before requesting service, please check the table for a possible cause of the problem. Some simple
checks or minor adjustments may restore proper operation. The most common problems are
related to cable connections, please disconnect and connect all cables again. If none of the below
indicated remedies solve the problem, consult your vendor.
Symptom Remedy
Installation
Receiver does not find
channels.
A warnring message
appears on screen:
Antenna Power
Overloaded”
If you are using a directional aerial, make sure it is directed towards a
digital TV transmitter and positioned correctly
Make sure it is possible to receive digital terrestrial signal in your area
It is advisable to use a standard outdoor aerial, which normally have
better specifications than an indoor one
Check the cable of the aerial
If you cannot solve the problem easily have your aerial and installation
tested by a professional
Please, turn off your receiver and check cable and antenna on a short cut
General
Standby indicator on
front panel does not
light up
Check if power is available at the wall socket. Check if the SCART cable
and antenna cable are correctly connected and the receiver is switched on.
Disconnect these cables, and reconnect them to ensure they are in place
Standby indicator on
front panel is red
Your receiver is in standby, press the power button on your remote
control
Remote control fails to
operate receiver
Check the batteries in your remote control. Make sure your receiver is
in the operate mode. Make sure you are pointing your remote control
at the receiver’s front panel
Make sure there is no direct sunlight from behind the receiver
There may be a temporary transmission error, or your receiver has lost
some of its software settings. Switch off your receiver at the power
source and switch it on again after a few seconds
No program broadcast
recorded on VCR
Check the connection between receiver and VCR. Please make sure
your VCR is set properly
Electronic Program Guide (EPG)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT5025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT5025 in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT5025

Strong SRT5025 User Manual - German - 21 pages

Strong SRT5025 User Manual - Dutch - 16 pages

Strong SRT5025 User Manual - Danish - 19 pages

Strong SRT5025 User Manual - French - 21 pages

Strong SRT5025 User Manual - Italian - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info