568543
5
Zoom out
Zoom in
Previous page
1/8
Next page
3
English
PART 1
4.0 CONNECTING THE ANTENNA
Preparations
1. Check if the broadcast in your country is horizontally or vertically polarised.
2. Fix the antenna to the multi-directional base as shown in the pictures:
3. Depending on how the signals are broadcasted (horizontally or vertically) you will have to
mount your antenna in the horizontal or vertical position for best performance.
4. Your antenna needs 5 V power to work properly. Check in the menu or user manual of your
terrestrial receiver to see if it supports the needed 5 V power.
Fig. 2 Fig. 3
H
V
V: (Vertical-Broadcast) antenna mounted
H: (Horizontal-Broadcast) antenna mounted
4.1 To power the antenna with Digital Terrestrial Receiver
1. Turn on your TV set and turn on your Digital Terrestrial Receiver.
2. Press the “MENU” button on the remote control of your Digital Terrestrial Receiver. Check in
the Set-Up or Installation menu of your receiver to see if the antenna power is set to “ON”.
(Normally this is indicated in the menu as ANT power, Ext Antenna power or Active antenna
power.) Refer to the user manual of your Digital Terrestrial Receiver.
3. Once you are sure that your receiver supports 5 V antenna power, switch off your receiver
and disconnect it from the 230 V main power.
4. Take the supplied “long” coaxial cable and connect the end with the “F connector” (screw
type connector) to the antenna. Carefully press the inner lead of the cable into the Female-F
connector at the back of the antenna. Turn the covering nut clockwise with your HANDS
until it is fixed.
5. Connect the IEC Male end to your receiver. Normally the input connector on your receiver is
marked as “ANT” (in) or as “RF” (in). Refer to the user manual of your Digital Terrestrial Receiver.
6. Connect your receiver to the 230 V main power and switch ON your receiver and TV set.
7. Proceed to 5.0 “Antenna installation”.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT ANT 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT ANT 45 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT ANT 45

Strong SRT ANT 45 User Manual - German - 10 pages

Strong SRT ANT 45 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info