1. Turn on your TV set and turn on your Digital Terrestrial Receiver.
2. Press the “MENU” button on the remote control of your Digital Terrestrial Receiver. Check
in the Set-Up or Installation menu of your receiver if the antenna power is set to “ON”.
(Normally this is indicated in the menu as ANT power, Ext Antenna power or Active antenna
power.) *
3. Select in the menu of your receiver the eld that shows the signal level indicators. (Normally
you can nd the signal meter in the Channel Scan eld of the menu.)
4. Now optimise the signal strength by nding the best position for the antenna. Keep the
antenna in your hand, try to reach the highest possible position. Now slowly turn the
antenna around its axis (in the horizontal eld), at the same time monitor the signal bars
in the menu. Once the signal indicator shows the maximum signal, x the antenna on that
position.
5. It is important to place the antenna in such way that an acceptable signal level is assured.
You can optimise the signal strength by moving the antenna to dierent locations in your
room, for example place it near a window, or place it on a high placed book-shelf. The best
position can be found by trying dierent locations.
NOTE: It is recommended NOT to place the antenna near to:
Devices that are strong source of radiation or interference such as DECT and GSM
telephones, transmitters, microwaves, etc.
Devices with high power consumption such as electrical heater, air conditioner, hairdryers,
etc.
* If you can not nd this option in the menu of your Digital Terrestrial Receiver, please check in your user manual if your receiver supports active antenna power
(5 V DC via the RF cable). If you are not sure; please contact your dealer.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Strong SRT ANT 10 ECO at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Strong SRT ANT 10 ECO in the language / languages: English as an attachment in your email.
The manual is 0,44 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
