480559
20
Zoom out
Zoom in
Previous page
1/22
Next page
19
EN
Trouble shooting
Noteverypictureorsoundproblemiscausedbyadefectinyourset-topbox.Ifyourunitdoessomething
unexpectedwhileyouareusingit,pleaseunplugit,waitafewsecondsthenplugitinagain.
Important – Never open your set yourself.
If this fails to solve the problem or the following measures do not bring satisfactory results, please consult
your retailer.
Problem
Your set-top box
doesn’t seem to be
working, and there are
no lights on the front
panel.
Your set-top box
doesn’t seem to be
working, and the
front-panel standby
light is red.
Your set-top box
doesn’t seem to be
working, and the front-
panel display is green.
You can see on-screen
interference.
Your remote control
isn’t working.
The menus and
banners are in
a language you
don’t understand.
Possible cause
Yourset-topboxisnot
receiving power.
Yourset-topboxis
switched off.
Yourset-topboxisnot
correctly connected to
your other equipment,
or
your other equipment is
not correctly set up.
Your TV is not switched to
show digital cable channels.
Your TV is not correctly
tuned.
The batteries are flat or
inserted the wrong way
round.
Something is between the
remote control and your
set-topbox.
The menu language has
been changed to a language
youdon’tunderstand.
Suggested solution
Make sure that the mains plug is properly
plugged in and that the mains supply is
switched on. Check that the mains wall socket
haspower(tryplugginginalamp).
Press
on the front panel or on your
remote control.
Check that all the connections are properly
made(seepage6).
Check that your TV is plugged into the mains
and that it is switched on.
Ifyourset-topboxisconnectedtoyourTV
via a HDMI lead, try selecting the appropriate
AV channel on your TV.
Check that your TV is correctly tuned to
yourset-topbox(seepage6). For further
information, refer to your TV user manual.
Check the batteries and replace them if
necessary.
Make sure you point your remote control
directlyatyourset-topboxandthatnothing
isbetweenitandyourset-topbox.TheIR
receivelightonyourset-topbox’sfrontpanel
should flash each time you press a remote
control button. If not try selecting your TV
“AV input”.
You can change the menu language as follows:
1. Press MENU.
2. Press four time the tarrowkey(starting
from the top item).
3. Press OK twice.
4. Press C/Buntil your language displays.
5. Press the green key to save the new
language.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8900 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info