751661
25
Zoom out
Zoom in
Previous page
1/28
Next page
1.32.2 RSS (Really Simple Syndication)
This menu allows you to select a link to read the latest RSS news from dierent sources or to add your
own links.
Use pq to highlight a link of your choice and press OK to enter. Select an item you want to read. Press
to quit. Also you have option to delete, add or edit an RSS feed of your own choice. Press the GREEN
button Add RSS Feed to open the keyboard. Use pq and tu to enter values. If you need to use special
characters press P+/P. To save the created RSS link, select Save and press OK.
1.32.3 Weather
This menu allows you to watch the weather in your region.
Use pq to highlight the menu item Weather from the Network menu. If you have correct Internet
connection then the weather page will show up with details on screen.
Use the YELLOW button City List to open a selection list with main cities. Use pq to highlight a major
city near you and press OK to select.
You can enter a city manually. Press the GREEN button Change City to open a keyboard. Use pq tu
to enter. If you need to use special symbols, press P+/P. To save the name, select at the end Save and
press OK.
Press the RED Refresh button to refresh information on screen.
Press the BLUE Change Temp Standard button to switch between Celsius and Fahrenheit temperature
format.
1.32.4 IP Settings
This menu allows you to setup or check the Internet connection. The default selection is DHCP set to
On. Normally the setup is done automatically by this. To test if the Internet connection works, select the
item SET and press OK. If successful, a pop-up message box will show up and you can start using it. If not
successful, then check your cable or router. Alternatively set DHCP to O. Then manually enter your IP,
Gateway and DNS values by using the 0 ~ 9 buttons. Select after entering these values the item SET and
press OK to store and to check.
A.1 Troubleshooting
There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your dealer or the local Service Hotline or send email to our Support via www.strong.tv. Do NOT try to
open or disassemble the receiver. It may cause a dangerous situation and warranty will be void.
Problem Possible cause What to do
LED indicator is not lit The mains lead is unplugged Check the mains plug
No signal found The antenna is disconnected
The antenna is damaged/
misaligned
Out of digital signal area
Active antenna requires to switch
ON the antenna power/external
power
Check the lead of the antenna
Check the antenna
Check with your dealer
Switch the antenna power of the
receiver ON/connect external
power
No picture or sound on
TV or amplier
HDMI or SCART is not selected on
your TV or amplier or the unit is
set to higher resolution as the TV
supports.
TV/amplier is not switched on
Switch to correct TV/amplier input
Select lower resolution on receiver
Switch TV/amplier on.
Check if S/PDIF connection is used.
21
English
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8550 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info