751661
11
Zoom out
Zoom in
Previous page
1/28
Next page
7
English
NOTE: Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor (at the front panel of the receiver) and
the remote control. Direct sunlight or very bright light can reduce or disturb
the reception of the remote control signals.
3.0 CONNECTION
1.12 Connecting to a terrestrial antenna
Fig. 6
To receive broadcast signals, your terrestrial indoor or outdoor antenna must be connected to the ANT
IN connector on the back of the receiver. Use a proper shielded antenna cable and suitable connectors.
NOTE: If the signals at your location are too weak to receive proper signals with
an indoor antenna, we recommend using an outdoor antenna which
can be pointed towards the transmission tower. Ask your local dealer for
more information. If you are using an active antenna with built-in antenna
amplier, switch the antenna power to ON in the menu Manual Search.
1.13 Connecting to TV with HDMI cable
Fig. 6
The TV set shall be connected to the receiver using a good quality HDMI cable. This connection gives the
highest possible picture quality.
1.14 Connecting to TV with SCART cable
Fig. 6
Your receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to the
receiver using a good quality SCART cable.
1.15 Connecting a USB storage device
Fig. 6
Use this connector to access les from your USB storage devices for Multimedia functions or update
the software of your receiver. HDD can only be supported with a maximum current of 800 mA. It is
recommended to use at least USB 2.0 storage devices for playback of video les or HD movies.
1.16 Connecting to the Internet to access HbbTV content
Fig. 7
To use the EVOTV portal and other interactive services, the receiver must be connected to the Internet.
Connect the Ethernet (RJ-45) connector at least with a class CAT5E cable to your router/socket/Extender
or similar applicable equipment, which provides access to the Internet.
1.17 Connection to main power supply
Fig. 7
After all the connections are established you can connect your new HD receiver to the main power by
using the included external power adapter and connect the plug it to the wall socket.
1.18 Extended connections for your home entertainment
Fig. 8.
Connecting to a Digital Audio Amplier with S/PDIF
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8550 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info