751660
13
Zoom out
Zoom in
Previous page
1/31
Next page
To use this option of your receiver it must be connected to your router. Connect the Ethernet (RJ-45)
connector with a class CAT5E (or higher) cable to your router.
3.6 Extended connections for your home entertainment
Fig. 8.
Connecting to a Digital Audio Amplier with S/PDIF
By connecting your receiver to a digital amplier or home cinema set, you can enjoy the best possible
sound quality and multi-channel audio (depending on broadcast). Connect your Digital Audio
Amplier or home cinema set with a suitable cinch cable to the S/PDIF connector on the back of the
receiver. Alternatively, if you’re using an analogue amplier, then connect the audio output jack for
stereo audio.
Connecting to a digital audio amplier and TV using HDMI
By connecting your receiver to an HDMI equipped digital amplier or home cinema set you will
enjoy the best possible sound quality and multi-channel audio (depending on broadcast). Connect
the HDMI output of the unit to an input of your amplier, and then connect the HDMI output of the
amplier to your TV set. Select the correct input on your amplier to watch and listen to programmes.
4.0 STARTING UP FOR THE FIRST TIME
Make sure that your receiver and antenna are connected/aligned correctly. If you have any related
questions accordingly, please contact your local service or retailer. Then switch your receiver “ON” by
using the power switch below the main power cord.
The rst time installation will guide you through the required steps, after that you will be able to enjoy
your HD TV completely. If you already connected an Ethernet cable to your receiver, you can access
RSS feeds and weather forecasts. We wish you lots of fun with your new product.
4.1 Language selection
When you use your receiver for the rst time, the “Bevorzugte Sprache” (Preferred Language) menu
appears. Use pq to select the desired language. Once you have selected your language, press the
GREEN Next button to go to the next page.
4.2 Region, Subtitles, Scan Mode and screen settings
The receiver will now show the “First Time Installation screen where you can adapt some of the most
important settings. Use pq to move to the desired setting and use t u to change values. Press the
GREEN Next button to go to the next page or press the RED Back button to go one step back. The
following settings are available:
Region: The region is pre-set to Germany. The receiver can only be used in Germany.
Subtitle: Select On to display subtitles per default, select O to hide subtitles per
default.*
Aspect Mode: Use this option to select the aspect ratio of the connected TV. The options are:
4:3 for a 4:3 TV (black bars on top and bottom of picture) and 16:9 for 16:9 TV
sets.
Scan mode: Select All to store scrambled and free-to-air channels or select Free to store
only free-to-air channels.
9
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8541 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8541 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8541

Strong SRT 8541 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info