480560
9
Zoom out
Zoom in
Previous page
1/27
Next page
PART 2 • English
6
3.3 Connecting to TV with SCART cable
Fig. 6
The receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to
the receiver using a good quality SCART cable.
3.4 Connecting to TV with cinch cable
Fig. 6
Your receiver is also equipped with Audio L, R and VIDEO connectors. As an alternative you can use
these connections if your TV set doesn’t have an HDMI connector.
3.5 Connecting to a digital audio amplifier
Fig. 6
By connecting your receiver to a digital amplier or home theatre system, you can enjoy the best possible
sound quality and multi-channel audio (depending on broadcast). Connect your digital audio amplier or
home theatre system with a suitable cable to the S/PDIF connector on the back of the receiver.
3.6 Connecting to a digital A/V receiver and TV using HDMI
Fig. 7
By connecting your receiver to an A/V receiver or enhanced digital home theatre system with
HDMI, you will enjoy the best possible sound and picture quality as well as multi-channel audio
(depending on broadcast). Connect the HDMI output of the receiver to the corresponding input of
your A/V system and then connect the HDMI output of the A/V receiver or home theatre system to
your TV set. Select the correct input on your A/V system to watch and listen to programmes. If your
TV set already supports DD audio we recommend you to use the direct connection as described
above in chapter 3.2.
3.7 Connecting an external USB storage device
Fig. 6
NOTE: For details to consider when using a USB storage device please refer to
chapter 1.5.
4.0 STARTING UP FOR THE FIRST TIME
Ensure that your connections are setup properly. In case of difficulties or questions, please ask your
local dealer or service for assistance. It is recommended to follow the Installation Guide step by step.
It will guide you through the basic installation and channel searching process. It will enable you to
enjoy digital HD broadcasts just within a few minutes.
Start by selecting your language using t/u. After selecting your language, press q to move the
highlight to Region. Select your region with the t/u buttons.
Display Mode: Use t/u to switch the HDMI resolution to your value of choice. If
your TV set doesn’t support a specific resolution you will see black
picture, but to recover you can use t/u for switching to the next
or previous resolution.
Aspect Mode: Use this option to select the aspect ratio of your TV set and the
preferred conversion method. The options are: Auto (automatic
detection of aspect ratio), 4:3 Panscan (Displays 16:9 broadcasts
full screen and cut upper and lower parts of 16:9 video on your
4:3 TV), 4:3 letterbox (black bars on top and under the picture
on a 4:3 TV) and 16:9 Wide Screen or 16:9 PillarBox (Displays 4:3
broadcast with back pillars at left and right sides on your 16:9 TV)
which you can use for 16:9 TV sets.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8525 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info