480560
6
Zoom out
Zoom in
Previous page
1/27
Next page
PART 2 • English
3
English
This manual provides complete instructions for installing and using this receiver. The following
symbols will serve as follow:
WARNING: Indicates warning information.
NOTE: Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the receiver.
(Bold Characters)
Move to Represents a menu item within a window.
(Italic Characters)
1.4 Accessories
Receiver - 1 pc.
User Manual - 1 pc.
Remote control - 1 pc.
Batteries (AAA) - 2 pcs.
WARNING: The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we recommend using (e.g.
NiMH) types with low self-discharge to ensure long time operation of remote control.
1.5 Usage of external USB devices
It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB 2.0
specications, the multimedia and video playback with your receiver would not work properly.
If you are going to use external USB HDD (Hard Disk Drive) please consider that it might be
the case that the power specifications exceed the supported output of your receiver (5 V/500
mA). If so, please connect your USB HDD to a corresponding external power adapter.
STRONG cannot guarantee compatibility to all types of USB storage devices.
It is advised not to store important information on USB storage devices used with
the receiver. Always make backups of data on your USB storage device before using
it with this receiver. STRONG will not take responsibility for any loss of information or
circumstances caused by loss of information.
Please ensure that the USB device is already formatted to FAT/FAT32 or NTFS. If it is not,
please format the USB device via your PC or notebook.
2.0 YOUR RECEIVER
2.1 Front panel
Fig. 1
1. q button: Switches the receiver between standby (off) and operating mode.
2. Stand-by indicator: Green light in operating mode and red light in standby mode.
3. Infrared sensor: Receives signals from the remote control.
4. Slot for smart card: The slot is behind the front flap and only intended for service use,
it won’t be used during operation.
2.2 Rear panel
Fig. 2
1. ANT IN To connect to your aerial using a standard antenna cable.
2. ANT OUT To connect to your TV or additional receiver via a standard
antenna cable.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8525 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info