17
A.1 TROUBLESHOOTING
In some regions, the digital terrestrial signal may be weak. In this case we recommend using an antenna
with built in amplifier.
Problem Possible cause What do I do
Standby light not lit Mains lead unplugged
Mains fuse blown
Check mains lead
Check fuse
No signal found Terrestrial is disconnected
Terrestrial is damaged/misaligned
Out of digital signal area
Check terrestrial lead
Check terrestrial
Check with dealer
No picture or sound Tuned to digital teletext channel Reduce to another channel
Scrambled channel
message
Channel is scrambled Select alternative channel
The remote control
does not work
The receiver is turned off. The remote is
not pointed correctly towards the receiver.
Front panel may be defect. The batteries
are dead.
Plug in and turn on the receiver.
Aim towards the receiver. Check
for any damage. Replace the
batteries.
Forgotten channel
lock code
Re-install channels to cancel
channel lock
Forgotten menu
lock code
Contact help line
After moving the
receiver to another
room it no longer
receives digital signals
The antenna can be connected to a filter
that may reduce the signal.
Try connecting the receiver directly
to the antenna.
Tips: The standard PIN code of the receiver is: 1234