751658
23
Zoom out
Zoom in
Previous page
1/26
Next page
Problem Possible cause What to do
The picture and
sound remain
frozen, or macro
blocks or similar
distortion are
visible on the
screen.
The transmission signals are
too weak or have reflections/
interference.
The antenna is not properly
adjusted.
Press the INFO key on the remote control
3x to call up signal bars to visually assess
signal strength and signal quality (both
parameters should be visible in the last
third of the infobars). Contact your local
Service.
No sound on TV
or amplifier.
The volume of the TV is set
too low.
The volume of the receiver is
set too low.
Increase the volume of the TV with its
remote control.
Increase the volume of the receiver with its
remote control.
The correct input is not selected
on your TV or amplifier, or the
unit is set to a higher resolution
than supported by the TV.
Switch to the correct TV/amplifier input.
Select lower resolution on the receiver.
The TV, digital receiver or
amplifier is not switched on.
Switch the TV/digital receiver/amplifier on.
The TV or digital receiver is not
connected to the mains.
Check the mains lead.
Bad cable connection. Make sure that any existing digital or
analogue A/V cable connections between
the used equipment (TV, digital receiver or
A/V amplifier) are properly connected.
Audio is muted. Press the ! button on your remote
control.
The TV power is off. Turn the TV on.
No access to
scrambled
services.
The channel is scrambled.
Your receiver doesn't support
scrambled channels.
Select an alternative channel.
No response
to the remote
control.
The receiver is off. Plug in and turn on the receiver.
The remote control is not aimed
correctly.
Aim the remote control at the IR sensor on
the front panel of the receiver.
The IR sensor on the front panel
of the receiver is obstructed.
Avoid or remove obstructions.
The batteries of the remote
control are not inserted, wrongly
inserted or exhausted.
Check whether the batteries are inserted
correctly or exhausted. If exhausted,
replace the batteries in the remote control.
19
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8222 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8222

Strong SRT 8222 User Manual - French - 28 pages

Strong SRT 8222 User Manual - Italian - 28 pages

Strong SRT 8222 User Manual - Spanish - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info