751657
25
Zoom out
Zoom in
Previous page
1/37
Next page
21
English
English
7.4.5 Factory Reset
This item will reset your receiver to the default factory settings.
WARNING! By resetting your receiver to the factory defaults, all your settings and stored
channels will be permanently deleted. Please use this option with care.
After restoring of Factory Defaults, the Init Install menu will appear on your
TV screen.
Use pq to select this item and then press OK or u to restore the factory setting and to delete all earlier
found channels and earlier made settings.
You will be asked to enter your current PIN code (or, if it was not changed, enter default PIN code 0000).
7.4.6 Update
This feature allows you to update the receiver software via the USB port.
When a new software is available for your receiver, it can be downloaded from our website www.strong.tv.
WARNING! The software update procedure will permanently delete all your settings
and stored channels. Please use this option with care. After this procedure
the Init Install menu will appear on your TV screen.
For the USB upgrading procedure, please follow the provided instruction on the website.
WARNING! During the upgrade process NEVER disconnect the receiver from the mains
or switch off the power! Doing so might damage your receiver and will void
warranty!
After an update the receiver restarts automatically.
7.4.7 Information
This sub-menu shows receiver specific information such as hardware, software and firmware information
and build date.
7.4.8 Auto Standby
Auto Standby is a feature that helps you reducing power consumption.
When set to 1hr/2hr or 3hr, the receiver will switch to standby mode if it doesn’t receive any commands
during this time (in hours).
Set Auto Standby to Off to deactivate the automatic standby function.
7.5 AV
Use this sub-menu to match your receiver to your TV set.
The following settings are available:
Aspect Ratio Use this option to select the aspect ratio of your TV and the preferred conversion
method. The options are: Full Screen - Displays broadcast on full screen on your TV, 4:3
PS - Displays 16:9 widescreen broadcasts full screen on your 4:3 TV, 4:3 LB - black bars
on top and under the picture on a 4:3 TV and 16:9 - use this setting for 16:9 TV sets
Video Resolution Use this option to select the video resolution of your TV screen. The options are: Auto
Detect (automatic detection of video resolution offered to the receiver) and manual
selections from 480i_30 up to 1080p_60. Please use a setting that matches and not
exceed the specifications for resolution of your TV. Selection above 576i is only
applicable on HDMI output
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8203 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info