751657
20
Zoom out
Zoom in
Previous page
1/37
Next page
16
English
7.1.3 Other parameters for channel installation
Define other parameters for channel installation.
Channel Filter: Define which channels will be stored into the channel list. With the selection of FTA
Only, only open non-scrambled channels will be added into the channel list. If All
Channels is selected, all kind of found channels (scrambled and non-scrambled) will be
stored into the channel list
Country Select the country of your residence
LCN: To select if the channel numbering will be according to LCN (as defined by operator) or
not
Active Antenna: Before connecting your antenna to the receiver, please read the user manual of your
antenna regarding antenna powering. This parameter is recommended to set to
On only for active internal or external antennas which require power supply via an
antenna cable with voltage of 5 V DC and consume less than 50 mA. In all other cases
please leave this parameter as Off.
7.2 Channel
Press MENU and select the Channel chapter.
This chapter provides options to organize your channels according to your preferences.
It consists of the following sub-menus: Channel Manager and Favorite List
7.2.1 Channels Manager
This sub-menu allows to lock, delete, skip, rename or to move of stored in receiver channels.
NOTE: To edit your channel preferences, it is required to enter the PIN-code to
access the edit functions (default PIN-code 0000).
Lock
You can block certain channels from being viewed by other people, i.e. children. To lock a channel:
- use p/q to select a channel;
- press RED. The selected channel will be marked as locked with a confirmation symbol in the lock
column;
- proceed as described for any other channels you wish to lock.
NOTE: Watching a blocked channel will be possible only after entering your PIN
code. Please check if the parameter System Lock in the Child Lock submenu
is set to “ON”. See chapter 7.4.2.
NOTE: To unlock a channel, please proceed the same way.
Delete
To delete a channel from the channel list of your receiver:
use p/q to select a channel;
press GREEN. The selected channel will be marked for deletion with a confirmation symbol in
the delete column.
A confirmation banner will be displayed. Select Yes to delete the marked channels or No to cancel
deletion.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8203 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info