751657
12
Zoom out
Zoom in
Previous page
1/37
Next page
8
English
3.6 Connecting to TV with mini AV-3RCA cable
Fig. 6
Connect one side of the cable with the mini AV connector to the AV output of the receiver and the other
side of the cable - with 3 RCA connectors to the RCA inputs of your TV set. Connect in accordance with
the colour marking of the TV inputs and the connectors of the cable.
NOTE: You should switch your TV set to Video mode. For more details, see chapter
4. Starting up for the rst time .
3.7 Connecting a USB storage device
Fig. 9
Connecting a USB device to the unit allows you to playback multimedia files. See chapter 7.6 Media
Center.
NOTE: It is recommended to use USB 2.0 storage devices or higher for recording
and playback of TV programmes or HD movies.
NOTE: Timeshift/recording and playback only works properly when a fast
USB storage device such as a USB 2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content requires a sufficient read/
write speed of the used USB storage device.
4.0 STARTING UP FOR THE FIRST TIME
After all connections have been made properly, switch on the TV and make sure the receiver is
connected to the main power.
If the mode indicator on the front panel is red, press q to switch on the receiver.
If you are using the receiver for the first time or restoring to Factory Default, the Init Install menu will
appear on your TV screen.
If your receiver is connected to a TV set by a mini AV-3RCA cable (supplied), then it is necessary to switch
the TV set to the AV input.
To do this:
Read the corresponding chapter of the user manual of your TV set.
Use the remote control of your TV set and switch it to AV input. Most of remote controls has
a dedicated button to select the source of the signal. Often this button is named as: «АV»,
«VIDEO», «INPUT», «Source» or with the symbol . If you have selected correct input, then
you will see the on-screen menu of the receiver named «Init Install».
NOTE: Depending from brand and model of your TV, the name of the AV input can
be different, for example: Video1, AV1.
If your receiver is connected to the TV set by an HDMI cable (not supplied with receiver), then it is
necessary to switch the TV set to the HDMI input.
To do this:
Read corresponding chapter of the user manual of your TV set.
Use the remote control of your TV set and switch it to HDMI input. Most of remote controls
has a dedicated button to select the source of the signal. Often this button named as: «АV»,
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8203 in the language / languages: English as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info