626503
25
Zoom out
Zoom in
Previous page
1/28
Next page
Step to: 30 sec to 30 min. Set the time step you like to jump forward to by pressing 4
during playback of recorded files. This only works when the info banner is
displayed on screen. If it is not, press INFO.
Time Shift to Record: If set to On the timeshifted part will be included into your recording when
you start to record the current programme.
PS Record: Select between On or Off. When Off is selected, recordings will also include
subtitles and Teletext (when available). Record to PS mode On allows
recordings without these extras and will need less space on your USB device.
After Recording: Go to Standby-mode or Watch TV. If set to Go to Standby-mode then receiver
will be switched to Stand-by after record by Timer is completed. If set to
Watch TV then receiver would not be switched to stand-by after record by
timer. In this case switching to Stand-by will be done according to “Auto
Standby” settings
Press EXIT to leave this menu.
7.5.7 Remove USB device safely
Select Remove USB device safely from the tools menu and press OK. The receiver will display a
message indicating that you can safely remove your storage device from the receiver.
NOTE After performing this function, the USB device is no longer accessible from
your receiver. To gain access to your storage device again, re-insert it or
switch the receiver to standby and on again.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your dealer or the local Service Hotline. Do NOT try to open or disassemble the receiver. It may cause
a dangerous situation and warranty will be void.
Problem Possible cause What to do
LED indicator not lit Mains lead unplugged Check mains plug
No signal found Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Active antenna requires to
switch ON antenna power/
external power
Check aerial lead
Check aerial
Check with dealer
Switch receiver’s Antenna
Power ON/connect external
power
21
25


Need help? Post your question in this forum.

Forumrules
1

Forum

strong-srt-8202

Reset search

  • Mijn toetsen PG+ en PG- werken niet. Is daar een oplossing voor ? Submitted on 25-5-2023 at 22:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8202 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8202

Strong SRT 8202 User Manual - French - 28 pages

Strong SRT 8202 User Manual - Polish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info