480566
21
Zoom out
Zoom in
Previous page
1/26
Next page
PART 1 • English
19
English
6.4.3 Timeshift
1. Make sure that in PDR menu the Timeshift function is set to ON. This can be adjusted in
Application” > “PDR” menu.
2.
Press;(Pause) button in TV mode to start Timeshift. The Recording Info banner appears
and shows the recorded time.
3.
To continue watching the programme press Ñ (Play) button.
4.
If you start Timeshift during recording the receiver keeps recording.
5. You can activate Fast Forward or Fast Rewind during Timeshift by pressing the 7 or 8
buttons. Another pressing of these buttons will change the speed (FF: x2, x4, x8; FR: x1, x2,
x4, x8).
6.
To choose a specific position or scene in Timeshift mode press INFO and choose the desired
position with the tu buttons.
7.
To leave Timeshift press <(Stop) button.
A.1 TROUBLESHOOTING
There may be various reasons for the abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact the
dealer. Don’t open the receiver cover. This may cause a dangerous situation and will void the warranty.
Symptom Cause Remedy
The 4 digits display on
front panel does not
light up.
The power cord is not plugged
in.
Check that the power cord is plugged
in to the wall outlet. Make sure power
switch on rear panel is in ON position.
No picture or sound W
rong connection of the Audio/
Video output of the receiver
to TV.
Audio muting.
TV power off.
Connect the Audio/Video output of the
receiver to TV correctly.
Press the MUTE button
Turn TV on.
No picture The receiver can’t receive the
signal
Incorrect values of channel
parameters.
You have switched to a Radio
channel
Check the antenna cable, replace the
cable, or connect the cable to the
receiver tightly.
Set the values channel parameters
correctly in installation menu.
Press TV/Radio to get back to TV
channels.
The remote control does
not work
The batteries of the remote
control are not inserted or
exhausted
Check whether the batteries are inserted
correctly in your remote control. Check
the batteries, and if exhausted replace
the batteries in the remote control.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8150 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info