480566
16
Zoom out
Zoom in
Previous page
1/26
Next page
PART 1 • English
14
Use pqtu buttons to select the item and press OK button to display the list of options, use
pq buttons to select Aspect Ratio then press OK button to confirm selection.
n Screen Control
Use pqtu buttons to select the item and press OK button to display the list of options, use
pq buttons to select Aspect Conversion then press OK button to confirm selection.
n RGB/YUV
Selects a mode of video output signal.
If you have connected your TV to receiver only by SCART cable then it is recommended to set
RGB mode. If you have connected your TV to receiver by HDMI or Component cable then this
value must be set to YUV
.
Use pqtu buttons to select the item and press OK button to display the list of options, use
pq buttons to select YUV or RGB mode then press OK button to confirm selection.
WARNING: If you have selected RGB mode then HDMI (digital) and YPbPr (component) outputs
on the receiver would be disabled!
n Brightness / Contrast / Saturation
Use pqtu buttons to select the item and press OK button to display the list of options,
use pq buttons to select level of Brightness / Contrast / Saturation then press OK button to
confirm selection.
5.3.3 Time Setting
T
o synchronise time in your receiver with broadcaster: set GMT usage to ON, select your time zone and
set Summer time accordingly to season.
In some cases it is recommended to set GMT usage to OFF and setup date/time manually.
5.3.4 Parental C
ontrol
In this menu, you can set menu lock status (Disabled or Enabled) and change the PIN code. Parental
rate menu allows you to block watching content which is rated for age equal or higher then you have
set in this menu. F
unction of this feature depends from broadcast and STRONG would not take any
responsibility if it doesn’t work. The default PIN code is 0000.
5.3.5 System Information
Displays the information about software version installed in the receiver.
5.3.6 F
actory Reset
Use Factory Reset only when you want to return the receiver to the condition of factory default. This will
delete all user settings and installed channels.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8150 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info