568534
17
Zoom out
Zoom in
Previous page
1/25
Next page
14
PART 1 • English
manual selections 480i, 576i up to 1080p Please use a setting that matches
your TV’s specifications. After a selection is made, you will be asked to
confirm. Selection above 576i is only applicable on HDMI output.
Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred conversion
method. The options are: Auto (automatic detection of aspect ratio), 4:3
Panscan (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV), 4:3
letterbox (black bars on top and under the picture on a 4:3 TV) and 16:9 (use
this setting for 16:9 TV sets).
Connection: Use this option to select the connection to your TV set. Select HDMI or TV
SCART. In TV Scart mode the analogue signals for RGB are available on the
TV Scart output. If HDMI is selected, only a CVBS signal is present on the TV
Scart output.
Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital
audio will be converted to stereo audio. Bitstream enables you to listen or
transfer DolbyDigital/DolbyDigital+ audio to the TV via HDMI or to a Home
entertainment system (for example) through coaxial S/PDIF.
7.3.3 Local TimeSetting
Here you can set up your region and time zone.
Region: Use tu to select the region you live in.
GMT Usage: Set to By Region for broadcaster defined time, User Define to select manual a
GMT zone or to Off to input time and date manually.
GMT Offset: Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to User Define.The GMT Offset range is “-11:30 ~
+12:00, increasing by half hours progressively. The cities matching the set
GMT Offset are displayed at the bottom of the screen.
Daylight saving time: Select Off or On to add one hour extra for summer time during the summer.
Date: Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the date. Press EXIT to proceed.
Time: Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the time. Press EXIT to proceed.
Time Display Select On to display time on screen, Off to remove.
7.3.4 TimerSetting
This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use pq to select Timer Setting from the System Setup menu and press OK to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with pq and press OK to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode: Choose between Off (Timer inactive), Once, Daily (Timer will be executed every
day, same time) or Weekly (Timer will be executed every week, same day, same
time) and Monthly (Timer will be executed every month, same day, same time)
Timer Service: Choose between Channel (Timer will wake up the receiver) or
Record (Timer will start to record the scheduled event).
Wakeup Channel: Use tu to select the channel the timer will wake up with.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8115 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 8115

Strong SRT 8115 User Manual - German - 31 pages

Strong SRT 8115 User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info