568533
22
Zoom out
Zoom in
Previous page
1/26
Next page
18

Input the correct password using the  . A confirmation window
is displayed.
Select Yes to return to factory settings. Select No to cancel.
Press  to leave.

This receiver is equipped with a manual and automatic OTA “Over-The-Air” software upgrade mechanism.
This menu allows you to manually upgrade the Over-The-Air update if the automatic update
mechanism does not function. It might not be available in your region. Please visit our website www.
strong.tv or contact your local service hotline for more information about this option.
 When you switch to Standby the OTA “Over-The-Air” software upgrade
mechanism will check if new software is available. During this process the
LED on front will light green. This can take a couple minutes!
If the receiver found new software it will show a message the next time you switch the receiver to ON
and you can confirm to load. After an update the receiver restarts automatically.
 During the upgrade process NEVER disconnect the receiver from the mains
or switch off the power! Doing so might damage your receiver and will void
warranty!

This feature allows you to upgrade receiver software via the USB port. When new software is available
for your receiver, it can be downloaded from our website www.strong.tv.
Place the software file (unzipped) in the root directory of your USB storage device (HDD, memory
stick etc.) and insert this device into the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press  to proceed.
The upgrade menu will now be displayed.
Use p q to select Upgrade Mode and choose option Allcode.
Use p q to select Upgrade File and choose the file containing the new software.
Once all settings are made, move the highlight to Start and press  to start the upgrade process.
After a few seconds, the receiver asks: “Are you sure to burn flash?”. Select Yes to finalize the upgrade
or No to quit without upgrading.
 If, after a software upgrade, the receiver should behave in an unexpected
way, please perform a factory reset as well. See chapter . After an update
the receiver restarts automatically.
 During the upgrade process NEVER disconnect the receiver from the mains
or switch off the power! Doing so might damage your receiver and will void
warranty!

Select Remove USB device safely from the tools menu and press . The receiver will display a
message indicating that you can safely remove your storage device from the receiver.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8113 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8113 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info