568533
8
Zoom out
Zoom in
Previous page
1/26
Next page
4

2.  Point your remote control towards this sensor.
3.  Connector for USB devices.

Fig. 2
1.  To connect to your antenna for the reception of broadcast signal.
2.  To connect to the terrestrial antenna input of your TV set.
This connection will allow you to watch analogue terrestrial
programmes if they are available via the tuner in your TV.
3.  To connect to a TV using a coaxial cable. This connection
(modulator) will allow you to watch channels from this receiver
on an UHF channel on your TV.
4.  To connect your receiver to a digital audio amplifier.
5.  To connect your receiver with your TV set using a HDMI cable.
6.  To connect your receiver with your TV set using a SCART cable.
7.  Your receiver requires a voltage of 220~240V AC (Auto-
selectable), 50/60 Hz +/-5%. Check the local power specification
before connecting your receiver to the wall outlet.

Fig. 3
1. q Turns the receiver On/Standby
2.  Shows the current channel information
3.  Turns the receiver to Standby after time selection
4. ! Mutes audio output of the receiver
5. 5 Fast rewind
6. 6 Fast forward
7.  Channel up/down in channel list mode
8. 7 Jump backwards
9. 8 Fast forwards
10.  Opens the main menu, in menu you will get one step back
11.  Exits from the menu or sub-menu
12. p q Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
13. t u Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific Menus
14.  Menu Off: Displays the current channel list
15.  To call up the multi-screen
16.  Favourite group selection
17.  Toggles between TV or RADIO mode
18.  Back to previous shown channel
19.  Channel selection or value input
20.  Sets the current audio channel to left, right or stereo
21.  Shows list of subtitled languages
22.  Shows Teletext on OSD (On Screen Display)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8113 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8113 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info