480567
20
Zoom out
Zoom in
Previous page
1/23
Next page
17
PART 1 • English
English
When the timer banner is on screen (activated by pressing u or INFO), the following actions
are possible:
tu and press OK to jump forwards and backwards in time during playback.
1 = Set marker point in play back, press again to delete marker point.
2 = Jump to next marker point.
3 = Jump forwards in time. (See details in 7.6.5 DVR Configuration under Step to.)
NOTE: You can also access the Record Manager from viewing mode with the RED
key on the remote control. The help banner at the bottom of the screen
explains all buttons used in this record manager to edit. Press EXIT to save
the settings and quit the menu.
7.6.3 DVR HDD Information
This option shows relevant information about the connected USB device.
Select DVR HDD Information from the Media+ menu and press OK to enter.
Press EXIT to leave.
7.6.4 HDD Format
The HDD format menu allows you to format the connected USB device.
WARNING! Formatting will permanently delete ALL data stored on the connected device.
Please make a backup copy of all data you wish to keep before entering the
HDD Format menu. STRONG cannot be held responsible for loss of data
from USB devices used with this receiver.
Select HDD Format from the Media+ menu and press OK to enter. Use tu to select the partition you
wish to format (Partition 1 is set per default) and press q to highlight Format. Press OK to proceed,
select Yes or No, or press EXIT to leave without formatting.
NOTE: It is possible to use already NTFS formatted USB disks.
7.6.5 DVR Configuration
This menu allows you to make settings for Time Shift, recording and playback.
Select DVR Configuration from the Media+ menu and press OK to enter.
Use pq to move the highlight and tu to change settings.
Press EXIT to quit.
Time Shift: On or Off. When Time Shift is set to Off, Time Shift becomes inactive.
Time Shift to Record: On or Off. When set to On, Time Shift is also possible during record.
Record Type: TS or PS. When TS is selected, recordings will also include subtitles and
teletext (when available). PS makes recordings without these extras.
Record Selection Select the partition whereto the receiver should record.
Standby after record: On or Off. Select if receiver must go to standby mode after Timer record.
Step to: 30 sec to 10 min. Set the time step you like to jump forward with the button 3
during playback of recorded files.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8106 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info