480567
17
Zoom out
Zoom in
Previous page
1/23
Next page
14
PART 1 • English
Wakeup Date: Use the 0~9 buttons to input the date for the timed event.
Wakeup Time: Use the 0~9 buttons to input the desired start time.
Duration: Use the 0~9 buttons to input the timer duration.
Once all settings are according to your wishes, use pq to move the highlight to Save and press OK
to confirm. To quit the timer without saving your settings, move the highlight to Cancel.
7.3.5 Parental Lock
This menu allows you to protect the installation menu and/or channels with a password. You can also
enter a new password in the Parental Lock menu.
Use pq to select Parental Lock from the System Setup menu and press OK to proceed. You will be
asked to enter your pin code. (DEFAULT: 0000)
Menu Lock: Locks the installation menu. You can set Menu Lock to On or Off.
Channel Lock: Choose between: Off, AGE 4, AGE 5, up to AGE 18. Channels with a parental
rating above the chosen age will be protected with a password (if available in
your local broadcast.)
New Password: Enter your new password (4 digits) here.
Confirm Password: Re-enter your password here to confirm.
7.3.6 OSD Setting
This menu allows you to change settings for: OSD Timeout and OSD Transparency.
OSD timeout: Sets the time after which on screen banners and messages disappear. The
range is 1~10 seconds.
OSD Transparency: To set the OSD transparency from Off ~ 40% with 10% steps.
Load Default OSD Setting:
Press OK to clear all OSD settings and reset to default values.
7.3.7 Favourite
This menu allows you to personalize the names of the 8 available favourite lists.
Use pq to select Favourite from the System Setup Menu and press OK to proceed. The names of all
groups are now displayed. Select the desired favourite group with pq and press OK to edit its name.
A text field will now pop up at the right of the screen. Use tu pq to select the desired characters
and enter them with OK. Once you have finished editing, press BLUE to save the changes. Once all
changes are made, press EXIT twice.
7.3.8 Auto Standby
Auto Standby is a new feature that helps you with reducing power consumption. When set to On, the
receiver will turn to standby if it doesn’t receive any commands for three hours. Set Auto Standby to
Off to avoid the automatic switch down.
7.4 Tools
Press MENU in viewing mode to enter the Main Menu.
Select the Tools submenu with pq and press OK or u to enter.
Use pq to highlight the desired submenu and press OK proceed.
Press EXIT to leave.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8106 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info