480570
16
Zoom out
Zoom in
Previous page
1/23
Next page
PART 1 • English
15
English
5.4 Setup
In this menu you can setup Timer for switching receiver ON/OFF according to schedule, block access to
the receiver settings and channels, get information about software and hardware version of your receiver,
update software and return receiver to factory settings.
5.4.1 Timer
Setting up Timer make possible to switch receiver to channels automatically, according to schedule.
Number: To select timer number use buttons tu
Status: By default set to Disabled. Set to Enabled in order to get access to other options
of timer.
Action: You can select one of the following actions:
n Power On”: receiver will be turned ON at defined date and time on selected channel.
n Interval”: receiver will be turned ON at defined date and time on selected channel. At the
end of interval the receiver will be turned to stand-by mode.
n Power Off”: receiver will be turned OFF at defined date and time.
Cycle: You can setup repeating cycle of the timer action. The receiver will execute
action once, daily or weekly.
Date or Week day: Press OK button to display calendar or list of week days. In calendar use
pqtu buttons to select date, P+/P- to change month. Press OK to confirm
selection. If timer cycle set to Everyday the date selection is not active. If timer
cycle set to Weekly – you can select week day.
Time: use buttons 0..9 to enter time in Hours:Minutes format.
Duration: use buttons 0..9 to enter interval between Power ON and OFF. This option not
available if Action of timer set to Power On or Power Off.
Channel: press button OK to display channel list. In the channel list use navigation
buttons to select channel and OK to confirm selection. You can use button
TV/R to switch between TV and Radio channels.
To store settings of Timer press
GREEN (Save) button. To discard changes press EXIT.
5.4.2 Parental control
In this menu you can setup restriction of access to menu and Enable/Disable lock of the channels that are
marked as locked in the channel organizer.
Menu Lock: Disabled by default. If you wish to lock access to Menu then set this option
to Enabled.
Service Lock: Enabled by default. Viewing of the channels marked as locked possible only
after entering PIN code. If you wish to disable lock of access to locked channels
then set this option to Disabled.
Change Password: In this menu you can change your password (PIN code). Select this option and
press OK.
On the factory PIN code is set to «0000». If you forgot your PIN code – call to service support.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8010 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info