480570
9
Zoom out
Zoom in
Previous page
1/23
Next page
PART 1 • English
8
Connecting with AV cable
On the back of your receiver you will find the RCA connectors (Audio Left & Right - red & white, Video
- yellow). Install an audio/video cable between the RCA connectors of the receiver and those of your TV
set or amplifier.
Tips: if you have only one audio input on your TV set, then connect Left (White) audio output
of the receiver to audio input of your TV set.
3.3 Connecting to digital audio amplifier
Connect one end of optical cable to S/PDIF output of the receiver. Connect another end of cable to
S/PDIF input of digital audio amplifier.
3.4 Connecting of external USB memory device
Extrernal USB memory device should correspond to USB 2.0 standard and it’s power consumption
should be not more than 500 mA. External USB memory device can be used for software update (see
part 5.4.4 of this manual for details). New software versions are published on the web site www.strong.tv
(support > download).
4.0 FIRST TIME INSTALLATION
Check correctness of all connections. If you are not sure, ask professional installer to install your
equipment. Make sure that power cord is connected to the mains power. Power on your receiver, then
turn on your TV set. On TV screen will be displayed menu “Select your language” of the installation
wizard. The installation wizard will help you to quickly setup your receiver and start to watch
programmes.
4.1 Language select
Use buttons pq to select your language and press OK to continue.
4.2 Terrestrial settings
This menu allows you to setup settings specific for your country.
Use buttons pq to select options and buttons tu to change values.
Country: select country corresponded to place of installation. If country is not in the list
– select “Other”.
Antenna power:
select “Enabled” if you do use active antenna with support of power injection
through coaxial cable. Make sure your antenna supplied by 5 V DC and earns
not more than 50 mA. If you use passive antenna or your antenna is powered
by an external power – select “Disabled
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 8010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 8010 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info