568531
5
Zoom out
Zoom in
Previous page
1/17
Next page
2
PART 1 • English
1.0 INTRODUCTION
1.1 SafetyInstructions
DO NOT INSTALL YOUR RECEIVER:
In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which
might obstruct the ventilationslots.
DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:
To direct sunlight or any other equipment that generates heat; to rain or intense moisture; to
intense vibration and to any shock which may cause permanent damage to your receiver or to any
magnetic objects, such as loudspeakers, transformers,etc.
Do not use a damaged power cord. It may cause a re or an electric shock. Do not touch a power
cord with wet hands. It may cause an electricshock.
When the receiver is not used for a long period of time, you should unplug the power cord from the
wallsocket.
Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean
your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, only after
disconnecting from the mains voltage supply. Make sure no foreign objects fall through the
ventilation slots because this could cause re or an electricshock.
Do not place any objects on top of the receiver because this might prevent proper cooling of the
componentsinside.
SafetyPrecautions
Never open the receiver cover. Doing so will void the warranty. It is dangerous to touch the inside of
the receiver due to high voltage currents and possible electrical hazards. Refer all maintenance or
servicing to qualied servicepersonnel.
When you are connecting cables, be sure that the receiver is disconnected from the mains supply.
Wait a few seconds after switching o the receiver before you move the receiver or disconnect
anyequipment.
Use only approved extension cords with compatible wiring that is suitable for the electrical
power consumption of the installed equipment. Please ensure that the electrical power supply
corresponds with the voltage on the electrical identication plate at the back of thereceiver.
If the receiver does not operate normally even after strictly following the instructions in this user manual, it is
recommended to consult yourdealer.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric
shocks and moisture. When unpacking it, make sure that all the parts are included and keep the packaging away
from children. When transporting the receiver from one place to another or if you are returning it under warranty
conditions, make sure to repack the receiver in its original packaging with its accessories. Failing to comply with
such packaging procedures could void yourwarranty.
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment. Otherwise, please follow the
instructionsbelow:
Refer to the user manual of your TV andantenna.
Make sure that the HDMI cable and outdoor components are in a goodcondition.
Use only a HDMI 1.3 cable or higher for maximumperformance.
If you use TV SCART connection, use then well shielded SCARTcable.
This manual provides complete instructions for installing and using this receiver. The following symbols will serve
asfollow.
WARNING Indicates warninginformation.
Tips Indicates any other additional important or helpfulinformation.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 80 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info