751654
25
Zoom out
Zoom in
Previous page
1/30
Next page
NOTE: SatCR can only work in combination with an optional multi-output (max. 8) satellite
splitter and a SatCR LNB, an example is STRONG type SRT L780 (max. 4 users).
NOTE: SatCR cannot be combined with any other DiSEqC function. SatCR systems are
mainly installed by professional experts.
7.5.2 Channel Search
The channel search procedure from the menu is almost the same as described in First Time Installation
chapter 4.3. This section contains more detailed information on how to add, modify or update your
channel list. In order to view video programmes, you must do a channel search with or without
smartcard in order to install the channel list of your choice. For HD+ channels, first insert HD+ smartcard
at the side panel of the receiver before you start the channel search. Then the receiver will install the
associated channel list of the HD+ bouquet (FTA and encrypted). For FTA channels only or for channels
from other satellites you do not need to insert the HD+ smartcard.
Select the search scheme you wish the wizard to follow:
1. Select HD+ channels to search for channels of the HD+ bouquet (channels numbered 100 and
above).
2. Select Preinstalled channels to restore a predefined German channel list from the receiver’s
memory (channels numbered 1~99).
3. Select Advanced channel search to search for channels on all/selected transponders for the
selected satellite (channels numbered above HD+ bouquet numbers).
Use the p q buttons to select the required search scheme. Use the t u buttons when you want to
change the value or press OK to select it from the list. Use GREEN to perform an HD+ channel update.
Use RED to restore the original HD+ channel list.
Use the button to return to the previous step. Press to exit the menu and to go back to the viewing
mode.
NOTE: If the messages No list found or No channels found are displayed, please check
the antenna connections, select correct satellite and check signal level and other
parameters from the satellite dish for selected satellites, as described in chapter 7.5.1.
Advanced channel search
Satellite: Select a satellite to be configured and scanned.
Transponder: Select the transponder you want to scan from the list of existing transponders.
Press RED to edit the parameters of the selected transponder. Press GREEN to add
a new transponder. Press YELLOW to delete the selected transponder (required
confirmation).
Frequency: Get information about the transponder frequency.
Symbol: Get information about the symbol rate of the selected transponder.
Polarization: Get information about the polarization of the selected transponder.
Search Mode: Select the channels that shall be installed. Available options: Free, Scrambled or All.
Channel Type: Select the type of channels that shall be installed. Available options: TV, Radio or
TV&Radio.
Search on:: Select where to search for new channels. Available options: One Transponder, One
Satellite or Selected Satellites.
The Signal Strength and Signal Quality indicators on the 2nd half of the screen will help you to make sure
that you get the signal with the selected parameters, as well as to adjust the antenna if necessary.
21
English
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7806 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7806

Strong SRT 7806 User Manual - German - 35 pages

Strong SRT 7806 User Manual - Turkish - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info