751654
12
Zoom out
Zoom in
Previous page
1/30
Next page
8
a. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good
quality coaxial cable and suitable ‘F-connector’ plugs.
b. Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the other end
to the HDMI input of your TV.
c. Plug the power adapter to a suitable wall outlet.
3.4 Basic connection using a SCART cable
Fig. 8
a. Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good
quality coax cable and suitable ‘F-connector’ plugs.
b. Connect one end of a good quality Scart cable to the TV SCART connector on your receiver and the
other end to the SCART input of your TV.
c. Plug the power adapter to a suitable wall outlet.
3.5 Connecting to the Internet
The receiver connects to the Internet through the Internet router or DSL/cable modem in your home
network. It connects to the home network over its Ethernet port.
Fig.9
Connect one end of the Ethernet cable to the receiver and the other end to the LAN port at the router or
DSL/cable modem.
3.6 Connection to main power supply
Fig. 9
After all the connections are done you can connect your receiver to power using the supplied external
AC/DC adapter. Now plug the adapter into the wall socket.
4.0 STARTING UP FOR THE FIRST TIME
Once you properly installed and connected all cables of the receiver, setup your receiver step by step by
First Time Installation procedure.
It will guide you through the basic installation and channel searching process.
4.1 Language selection
Select your preferred language for the on screen menu.
Use p q to change language and press OK to confirm your selection.
4.2 Antenna Settings
4.2.1 Satellite selection
To set up the receiver for the type of connected antenna, follow the instructions below.
You have technical possibility to configure your receiver to get signal from up to 4 satellites. Select LNB
to set specific satellite or leave it unassigned. Select the satellites you wish to receive with the receiver.
Each of the satellites in the built-in satellite list is configured with predefined default parameters. You
could use RED button to perform Dish setting for selected satellite, button to return to previous
step and GREEN button to continue (refer chapter 4.3 Channel Search). In case you use just Astra 19.2E
satellite, you could skip this step and also press GREEN button.
LNB 1 Select Astra 19.2E or Astra 23.5E satellite. Default value for LNB1 is Astra 19.2E.
LNB 2 – 4 Select from the list additional satellites from which you wish to view channels with
your receiver. Default value for LNB2 is Hotbird 13E. Default value for LNB3 and LNB4 is
Not assigned.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7806 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7806 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7806

Strong SRT 7806 User Manual - German - 35 pages

Strong SRT 7806 User Manual - Turkish - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info