480571
16
Zoom out
Zoom in
Previous page
1/25
Next page
13
PART 2 • English
English
7.2.2 Factory Default:
A factory default will reset all settings of the receiver to the factory default. To reset the receiver, you have
to enter your PIN code (DEFAULT PIN: 0000) Select Factory Initialization and Press OK. You have to enter
your PIN code again to make 100% sure that you want to perform this action.
After the reset, the receiver will start up with the Setup Wizard.
WARNING A factory reset will permanently delete all your personal settings, timers and
stored channels. Please consider this before you perform a factory reset.
7.2.3 Lock Setup:
Within the Lock Setup menu you can enable or disable the menu lock function and change the PIN code.
Before you can enter this menu you have to enter your PIN code (DEFAULT PIN: 0000). Use pq to
highlight the setting you wish to change and tu or 0~9 to change the value of the highlighted setting.
Install Lock: Here you can change the PIN code setting for the access to installation menu.
Select ON if you like to protect entering Control panel menu with PIN code.
Select OFF to disable this function.
Parental Lock: Select ON if you want to switch on the protection of channels with LOCK sign.
Select OFF to disable this function.
New PIN code: Use this function to set your own personal PIN code. Enter here your new PIN.
Confirm PIN code: Enter here again the new PIN code to confirm. A successful change of PIN is
confirmed by an on screen message.
Use EXIT to go back to the previous menu.
7.3 CAS
SMART CARD
In this Nagra CAS menu you can read the details form your HD+ smart card and can change the PIN
code from this Smart card.
Find below Smart Card Information all details as Subscribed date and Smart Card serial number. This
information show you if card is still active and if you need to call the Call centre of HD+ to activated
it again.
Press OK to open Change CA PIN menu. Enter with the numeric buttons 0~9 first default PIN code
(0000) of 4 digits. Enter now your new PIN and confirm again PIN. A successful change of PIN is
confirmed by an on screen message.
Use EXIT to go back to the previous menu.
WARNING Please be aware, that the CA PIN is the PIN from your Smart Card, changing it
has nothing to do with receiver PIN code!
7.4 Multimedia
The Multimedia menu allows you to see detail information of your connected USB device, handle your
records and give you access to your music and pictures on USB device. It consists of the following sub-
menus: USB info & Format, Record Manager and Music & Photo Player. Choose the desired sub menu with
pq and press OK to advance.
7.4.1 USB Info & Format:
The USB Info & Format menu displays all details from the connected USB storage device. It contains
information about the storage capacity and about the current free space for new recordings.
If you want that all functions are fully supported, as Jpeg and MP3 play back, ensure that either the USB
device is already formatted in FAT or FAT32 system on your computer. When you are going to use it only
for record and playback, we recommend you to format it to E2FS (Linux file system) in this menu for the
best performance of record and playback.
Use pq to select HDD Format (E2FS) and press OK button to start formatting of the connected USB device.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7805 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info