751653
27
Zoom out
Zoom in
Previous page
1/32
Next page
Repeat Mode You can set the RepeatMode mode, whether the images are to be repeated
Random all All or not Off at all.
Press MENU or to exit the menu.
7.5 Update
In this menu you can update the receiver via USB or OTA (= Over The Air /download via satellite). Select
the desired sub-menu using the pq buttons and press OK to continue.
7.5.1 USB Software Update
This function allows you to perform a software update using a USB storage device.
Download the appropriate software and update instructions from our website www.strong.tv and unzip
them to your correctly formatted USB storage device. Load the file (s) into the main directory of your
USB device, then connect it to your receiver. Switch the receiver ON and wait until the storage device is
successfully detected.
1. Wait a few seconds (~ 10 sec.) until the receiver displays a message that new software is
available. If no message is displayed, please try another storage device!
2. Use the t u buttons to select OK and press OK to perform the update.
3. The receiver now changes to the update mode. Please wait until the update is completed!
4. Please remove the USB device as soon as the corresponding message is displayed on your
receiver!
After the successful update you need to remove the USB device to reboot!
WARNING: NEVER disconnect the receiver from the mains or switch the power OFF
during the update procedure. It can damage your receiver and warranty will
void! In case of an USB software update please consider that the receiver
may delete all channels, data and user settings in certain cases.
7.5.2 OTA Software Update
With the OTA (Over The Air) function, you can search for software updates via satellite. Ask your STRONG
dealer or visit our website www.strong.tv for more information. Only in the case of an available update
and appropriate handling the option will be available in the menu. It is possible that you can also receive
an update request after starting up the receiver. Updates which are broadcasted via OTA are intended to
improve and to enhance the product so it should be carried out in your own interest.
Press OK on the OTA Software Update menu. The receiver starts with the software search. Follow the
further instructions on screen.
WARNING: During the update process NEVER disconnect the receiver from the mains,
switch power OFF or disconnect the receiver from the antenna cable! This
can damage your receiver and warranty will be void! In case of an OTA
update please consider that the receiver may delete all channels, data and
user settings in certain cases.
23
English
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7510 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7510

Strong SRT 7510 User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info