751653
22
Zoom out
Zoom in
Previous page
1/32
Next page
and press the YELLOW Move button. The channels will be inserted below the
selected position.
Create Favourite Lists
Select FAV and press OK to create favourite lists. On the left, below the TV picture, the groups, which are
available, will be displayed. Use pq to select a group. If you press OK, a keyboard appears and you can
rename the group. Within the keyboard use the pq and t u buttons to navigate and OK to enter the
desired character/number. Use RED to delete the existing name and GREEN to switch between capital
and small letters. Use P+/Pī˜ž to switch to the special characters.
Once finished, select Save and press OK. Then go to the right via u button, where your usual program
list is displayed. Use FAV to add a channel to the selected favourite list and press OK to switch to this
channel. When you go to the centre, you can use FAV to remove the selected channel from this favourite
list (only from the FAV list). You can also activate the hi function by the YELLOW button. A hi will
appear next to the channel. Now move it to the desired position by using pq and confirm the new
position by pressing the YELLOW button again. In this case, channels can only be moved one by one.
To exit from a menu, press either ļ‚‹ to go back one step, or MENU to go directly to TV mode. When you
exit the menu by ļ‚‹/MENU, you will be asked to confirm the changes. This is applicable for all changes
you made.
NOTE: The simpliTV list contains channels in the sequence and numbering of the
broadcaster. Added/additional channels which are not included in the list
are listed from channel number 400 and cannot be edited. The channels
can be edited in My TV List, see chapter 7.2.1 TV Channel Manager
7.2.2 Radio Channel Manager
Please refer to the previous chapter TV Channel Manager to find out how it works in radio mode. The only
difference is that no picture is available.
7.2.3 EPG (Electronic Programme Guide)
For details on the EPG please refer to chapter 6.7 EPG (Electronic Programme Guide).
7.2.4 Parental Control
In this menu, you can make a PIN-Code Change, set a Menu lock and Program Lock Age.
To enter this menu, you need to enter the PIN-Code (DEFAULT PIN: 0000) first. Use the pq buttons to
select the desired setting or press OK to list the options. Use the t u buttons to change the setting.
Menu lock: Use t u to select ON or OFF, depending on whether you want to use this
function. It allows you to block access to the sender management and the
complete installation menu.
Program Lock Age: Use t u to choose between the following settings: Off, 12 years, 14 years
16 years or 18 years. As soon as you switch to channels which support child
protection or EPG-based age restrictions, you must enter your PIN-Code
according to your settings.
PIN-Code Change: Press OK to open the options listed below.
Old PIN-Code: Use 0 ~ 9 to enter the old PIN-Code.
New PIN-Code: Use 0 ~ 9 to enter the new PIN-Code.
18
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7510 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7510

Strong SRT 7510 User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info