751653
14
Zoom out
Zoom in
Previous page
1/32
Next page
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at STRONG understand that you eagerly anticipate enjoying your new HD receiver. We do, however,
recommend reading the full manual to get the best performance of your STRONG HD receiver.
To switch your receiver ON or to Standby, use the q button on the remote control. Choose a channel
with pq or the CH+/CH buttons. Alternatively, you can choose the channel number with the 0~9
buttons on the remote control or press OK in viewing mode to display the channel list. The volume
can be adjusted with t u or the VOL+/VOL buttons. The usage of VOL+/VOL and ! is possible
in ALL menus which present a TV picture in the background and can be used in the videotext mode
additionally. P+/P enables you to scroll page wise in all lists, which allows you to select channels or
other items as conveniently as possible.
To open the channel and programme* information, press the INFO button in viewing mode. In this state
it is possible to use t u to display channel and programme information about other channels without
switching channels, but however in this mode you can also switch to the selected channel by pressing
OK. Press INFO twice to display detailed programme information of the current or next programme.
For the current programme information use t u to change between the current and next event
information. In the respective programme information you can use P+/P to scroll if applicable. If you
press the button a third time, technical details of this channel will be displayed. Press INFO or to close
the information.
* Programme information are displayed in case of availability. Availability depends on the broadcast.
NOTE: 5 min after switching the receiver into Standby it will enter the deep sleep
mode. Within this time the receiver is able to start up quickly. Starting up
from deep sleep takes approx. 35 seconds.
6.0 OPERATION
In viewing mode, several features are available to make watching TV a true pleasure. This chapter
describes these features. Please also read chapter 7.0 to get familiar with the menu of your new receiver.
6.1 Changing channels
Your new receiver is equipped with three ways to change channels.
1. Via direct access
2. Via the channel list
3. Via the CH+/CH or pq buttons
4. Via using the 9 button
6.1.1 Direct access
To gain direct access to a certain channel, simply input its number with the 0~9 buttons on the remote
control. Channel numbers can be up to four digits long. Entering a number with less than four digits is
possible. After entering the channel number just wait a few seconds or press OK and your receiver will
switch to the selected channel.
NOTE: When using the simpliTV List some channel numbers may not be assigned
or present in the list. Channels which have been searched manually or been
added personally (e.g. when you had installed another list before installing
the simpliTV List) will be assigned from channel number 400 onwards.
10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7510 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7510

Strong SRT 7510 User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info