751652
26
Zoom out
Zoom in
Previous page
1/32
Next page
Pictures:
UP/DOWN: Enter the folder with pictures les. Use the pq to select a picture. If format is
supported then in the small PIP screen it shows the picture. Press OK button to watch
it in full screen mode.
RED Interval: Before the playback of a picture in full screen, you can setup a slideshow / diashow.
Press the Red button Interval to enter the sub option menu Select time interval. Select
time of the slide show or switch this function o. After you select a time, press OK and
show starts to play. Press the button to stop.
7.4.2 DVR setup
This menu allows you to setup settings for Timeshift functions, DVR Timer start and stop handlings.
The following settings are available:
Timeshift Status: Choose Enable to activate the Timeshift function and Record DVR function
will be switched O.
Choose Disable to deactivate the Timeshift function and Record PVR function
will be switched On.
Timeshift Step: Use the 0~9 buttons to enter the time steps in playback
Timeshift Duration: Use the 0~9 buttons to enter the total time space you would like to use on
the external connected USB device.
Start record earlier: Select a time to start record earlier as programmed. This is a nice function if
you booked events directly from EPG which can be sometimes wrong in time,
due to actuallities.
End record later: Select a time to stop the record later as programmed.
REC Icon: Select between 5Sec 5 seconds or 10 Sec 10 seconds to show the record Icon
on screen after you start record. Select On for always show the Icon during the
record.
Playback Repeat: Select between On to start over again playback of record you watching. Select
O to stop normal at the end.
7.4.3 Storage Device Setup
This option shows relevant information about the connected USB device. In this menu you can also
format your USB storage device and safely remove.
Select Storage Device Setup in the Storage menu and press OK to enter.
All details as free and used space sizes and used le system are shown.
Press the Red Safely Remove button and press OK to safely disconnect the USB device. The receiver will
display a message indicating that you can now safely remove your storage device from the receiver.
Press the Blue Format USB Device button to format the connected USB device.
Please, enter your PIN code to access the menu and press OK to start formatting.
Press to leave this menu.
NOTE: After performing the Safely Remove function, the USB device is no longer
accessible by your receiver. To gain access to your storage device again,
re-insert it or switch the receiver to standby and on-mode again.
22
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7502 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info