751651
23
Zoom out
Zoom in
Previous page
1/30
Next page
7.3.2 System Settings
In this menu, you can adjust the video parameters according to the connected TV, while general settings
are also available.
HDMI Resolution: This allows you to set the resolution for your HDMI output. If your TV does not
support the newly set value, the screen turns black. In this case, wait for about
10 seconds and do not press any buttons on the remote control, then the
value will automatically be reset to the previous one.
Aspect Ratio: Set the screen format that corresponds to that of the connected TV (4: 3 or
16: 9).
Aspect Conversion: Set the image conversion as required.
When a TV is connected with the aspect ratio of 4: 3, the optimal mode is
Letterbox. A video in the 4: 3 format is not adjusted in this mode, but a video
in the 16: 9 format is adjusted so that it is reproduced completely and without
distortion (there are black horizontal bars above and below the picture).
When a TV with aspect ratio 16: 9 is connected, the optimum mode is 16: 9.
A video in the 4: 3 format is reproduced with this setting without distortion
(however, there are black vertical bars on the left and right of playback). A
video in the 16: 9 format is displayed without image adjustment and covers
the entire screen. Note that it is also possible to set the format via the menu of
your TV (depending on your TV model).
HDMI Audio Output: Here you can set the setting for the digital audio output via HDMI. Press the
t u buttons to select between BitStream and PCM. If a TV set that supports
Dolby® Digital * is connected, use the BitStream setting. If this is not the case,
use PCM.
S/PDIF Audio Output: Here you can set the digital audio output via the coaxial S/PDIF. Press the
t u buttons to select between BitStream and PCM. If a home theater,
amplifier, or similar is connected that supports Dolby® Digital *, use the
BitStream setting. If this is not the case, use PCM.
OSD Transparency: You can set the transparency in this menu. You can choose between different
values and Cover
Banner Time Out: Here you can adjust how long the infobanner is displayed.
Recent channel list Here, you can set the function of the 9 button, factory-set On, which allows
you to open the Recently Viewed Channels list using 9 in TV mode to access
up to 30 of the most recently viewed channels receive. If you set Off, the
button will only change between the 2 most recently viewed channels.
Deep Standby After: This function switches the receiver to the power save mode (Deep Sleep) after
switching it off into the standby mode within the set time. Available settings
are: 5 minutes, 15 minutes, 30 minutes, 1 hour, 3 hours, and Off. The receiver
consumes less power than in standby mode. To power up from deep sleep
mode, it takes about 45 seconds.
Auto Standby: This function allows you to set the hours after which the receiver should
automatically switch to standby mode. Available settings are: 1 hour, 2 hours,
3 hours, 4 hours, 5 hours, 6 hours, and Off. If the receiver has not been operated
during the set time, it automatically switches to standby mode. This is an
additional way to reduce power consumption.
19
English
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7501 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7501

Strong SRT 7501 User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info