751651
16
Zoom out
Zoom in
Previous page
1/30
Next page
NOTE: DVB subtitles on Astra 19.2 are currently available on different German
channels: Das Erste HD, ZDF HD, 3sat HD, arteHD, WDR HD and other
popular channels. If you switch the Subtitles Display to On, the according
subtitles will be displayed automatically in case of availability for this
channel/movie. When the setting is Off subtitles can be temporary opened.
Further information about subtitles can be found on the broadcaster's own
videotext pages or websites.
6.6 Changing the video settings
Press the OPT button in viewing mode to change settings like HDMI Resolution, Aspect Ratio and Aspect
Conversion or to have a look on the current settings. To select use pq and to change use t u. After all
settings have been made, press to quit.
NOTE: If you configure an HDMI resolution which isn't supported by your TV, there
is no problem because if you press no button, the receiver will automatically
switch back to the last used resolution after ~ 10 seconds. However, if you
can see the displayed message, then confirm the selected resolution by
pressing OK.
6.7 EPG (Electronic Programme Guide)
The Electronic Programme Guide (EPG) provides an information overview on the current television
programme. The information is provided by the respective broadcaster and may not be available for all
channels.
Therein you will find program information and overviews and you can also program a timer (for viewing
or with your VCR).
To open, press the EPG button in TV mode. By default, the Grid EPG is set, which gives you a better
overview of the current program on several different channels. On the left you will see the channel list,
on the right the events preview with the event information for the next hours. The corresponding short
information about the selected event is displayed in the upper right of the screen with the start and end
of the event. Use the pq buttons to select the desired channel, then press OK to switch to the channel
and load its information. If you press OK again on you will directly switch to TV mode. Use u to highlight
a particular event of the selected channel. Press INFO to display detailed information and press to
close it again. Press the BLUE button to go 6 hours forwards and press the YELLOW button to go 6h
backwards (not further than to current time). To go directly to the current time use the GREEN button.
The RED button allows you to book a timer for a selected event and with LIST you can open the timer
list.
For details on editing timers, see chapter 7.3.4 Timer, the function is identical.
Use the EPG button to switch to Single EPG.
Single EPG
In this form of the EPG, you always see the list of information for the selected channel on the right where
you can use pq to select an event. The corresponding event description is located in the lower area. To
go to the next or previous day, use the BLUE and YELLOW buttons, to return to the current contents use
the GREEN button. The remaining functions stay as described above. To switch to the Grid EPG use the
EPG button and to leave the menu use or press OK for a 2nd time on the selected channel.
12
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7501 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7501

Strong SRT 7501 User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info