568532
7
Zoom out
Zoom in
Previous page
1/23
Next page
4
PART 1 • English
2.3 Rear Panel
Fig 2.
1. SAT IN To connect to the LNB of your satellite dish for reception of satellite
broadcast signal
2. SAT OUT To loop through the satellite signal to a second receiver
3. AUDIO (L/R) To connect to the audio input of your HIFI or television
4. VIDEO (RCA) To connect to the RCA video input of your TV or VCR using an RCA cable
5. S/PDIF To connect to a digital or home cinema audio amplifier
6. TV SCART To connect to TV using a SCART cable
7. IR To connect the IR extender
8. HDMI To connect to the HDMI input of your TV using a good quality HDMI cable.
9. Power switch To switch the mains power ON or OFF
10. Power cord The receiver requires a mains voltage of 100 ~ 240 V AC 50 ~ 60Hz
(auto selecting). Please check the local power conditions before
connecting the receiver to the mains supply.
2.4 Remote Control Unit
Fig. 3.
1. q Turns the receiver ON/Standby
2. ! Mutes the audio output of the receiver
3. [0~9] Channel number and numeric value input
4. SAT Satellite selection in normal viewing and channel mode
5. TV/R Toggles between TV and Radio mode
6. MENU Displays the menu in viewing mode or to go back one step in the menu
7. EXIT Go back one step in the menu/cancellation of current process/exit
from main menu to viewing mode
8. pq Switches to the next/previous channel in viewing mode or moving the
highlight up/down in the menu
9. tu Increasing/decreasing of the volume level in viewing mode or
changing values of settings in the menu
10. OK Viewing mode: Displays the channel list. Menu: activation of the
highlighted item
11. FAV Toggles between available favourite groups and all channels list
12. EPG Viewing mode: Displays the EPG (Electronic Program Guide)
13. V+/V- Increasing/decreasing of the volume level
14. INFO Press once to display channel number/name and now/next info.
Press twice to display frequency/signal strength information.
15. AUDIO Displays the audio selection menu with selections for available
languages and audio modes
16. TEXT Displays the teletext browser
17. P+/P- Switches to next/previous channel in viewing mode
18. RED/RCL Toggles between the current channel and the previous channel in
viewing mode
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7300 CI plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7300 CI plus in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7300 CI plus

Strong SRT 7300 CI plus User Manual - English - 23 pages

Strong SRT 7300 CI plus User Manual - German - 29 pages

Strong SRT 7300 CI plus User Manual - Dutch - 23 pages

Strong SRT 7300 CI plus User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info