WARNING NEVER power off the receiver or remove the USB device during the
software update process. Doing so might cause irreparable damage to
your receiver and will void your warranty.
Banner on screen: Set the time-out for the info banner. Possible settings are: 3, 5, 7 seconds.
Network setting The Link Type is default LAN, for your Local Area Network. The IP setting is set
default DHCP On, meaning the IP numbers will be automatically negotiated
with your router, if router is set as DHCP server. If you want to use different
numbers, select DHCP Off and enter your preferences. When setting up
manually, you need to provide a unique IP address, Netmask, Gateway and
DNS for your receiver. Refer to the manual of your router or modem to setup
properly. These manual settings require some knowledge of IP protocol. At
status, information is given about the current state of the connection.
7.7 USB
Press MENU and select USB. The menu provides the Multimedia feature for playback of Music, Photo
and Movie. The different file formats listed below are supported. In this menu you can make movie
and photo configurations and format the USB device into a format accepted by the receiver. The unit
supports USB devices with FAT and FAT32 format. Make sure your USB device is formatted correctly.
NOTE:
STRONG cannot guarantee compatibility (operation and/or bus power) with all USB
mass storage devices and assumes no responsibility for any loss of data that may occur
when connected to this unit.
With large amounts of data, it may take longer for the system to read the contents of
a USB device.
Some USB devices may not be properly recognized. Even when they are in a
supported format, some files may not play or display depending on the content.
7.7.1 Multimedia
If there is no USB device plugged in, a warning message "No USB Device is Found" will be displayed.
When a USB device is detected you can select between Music, Photo, Movie and DVR* in this menu.
Select one of them, press OK to enter the file browser and select the file you want to play.
Music – supported file formats are MP3 and WMA**
Photo – supported file formats are JPG and BMP**
Movie – supported video files in various formats (MPG, MPEG, TS, VOB, MP4, AVI, ...)**
DVR* -- your recordings made by this unit. Find the HBDVR folder or use shortcut with the u button.
*This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via USB has
not yet been installed.
**STRONG cannot guarantee the playback of video files although extensions are listed here, as the correct playback depends on codec used, data bit
rate and resolution as well. Please consult the STRONG Hotline in your country to get more details.
Music
Select a music file and press OK to start playback.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Strong SRT 7009 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Strong SRT 7009 in the language / languages: English as an attachment in your email.
The manual is 0,98 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
