751648
19
Zoom out
Zoom in
Previous page
1/32
Next page
15
3. 576i: for PAL system TV.
4. 576p: for PAL system TV.
5. 720p: for NTSC or PAL system TV.
6. 1080i: for NTSC or PAL system TV.
7. 1080p: for NTSC or PAL system TV.
TIP You can change the video resolution directly from viewing mode by
pressing the GREEN button on the remote control.
TV Format
Set the standard corresponding to your TV set. Available options are: PAL and NTSC.
Video Output
This setting is only relevant when the receiver is connected to the TV set via Scart. Select RGB for the
best picture quality or CVBS if your TV doesn’t support RGB.
7.3 Channel Search
To access the menu press MENU and select Channel Search. It contains two options: Dish setup and
DB (Data Base) Management. Select an option and press OK to enter it. Press to exit the menu.
7.3.1 Installation
7.3.1.1 Dish setup
Use p/q to highlight the satellite your dish is aimed at. Its antenna settings will be shown at the
right side. You can enter the right side with the tu buttons and return to the satellite list with .
7.3.1.2 Congure the antenna settings for the selected satellite
LNB Type: Press tu or OK to show the list of LNB Types. The Universal LNB
(09750/10600 MHz) is supported – the most used on the market. SatCR A
and SatCR B are used for SatCR systems. If only 1 SatCR LNB is connected,
use SatCR A. SatCR systems are mainly installed by professional experts. An
optional satellite splitter is required for multi-users.
LNB Power: Use tu to set the LNB power. 13/18V is the setting for a Universal LNB.
22KHz: Use tu to switch the 22KHz oscillator signal on or off. Auto is the setting for
a Universal LNB.
DiSEqC1.0: To select the correct port from up to 4 (if available) for the corresponding
LNB.
DiSEqC1.1: To select the correct port from up to 16 (if available) for the corresponding
LNB.
Motor: If using a motor driven dish, press tu to choose between DiSEqC1.2 and
DiSEqC 1.3 depending on the motor type you use.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 7009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 7009 in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong SRT 7009

Strong SRT 7009 User Manual - German - 40 pages

Strong SRT 7009 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info